Nondestructive testing for identifying defects on the surface of metal materials is important for industries and infrastructures. The Rayleigh wave is widely used for detecting these surface defects. For replacing piezoelectric transducers with electromagnetic acoustic transducers (EMATs) for the surface inspection of metal materials, this article proposes a new magnet and coil combination consisting of a periodic-permanent-magnet (PPM) and a returned dislocation meander line coil. The returned dislocation meander line coil was developed using a traditional meander line coil, whose wires return from one side to another and shift for a certain distance. A 2-D finite-element simulation was conducted to analyze the performance of the proposed Rayleigh wave EMAT. The simulation results revealed that, compared with a large conventional magnet, the PPM increased the maximum magnetic flux density, and made the magnetic flux density distribution more concentrated on the specimen's surface, particularly below the coil. In the middle part of the coil, the PPM greatly increased the intensity of the horizontal magnetic field. Additionally, the returned dislocation meander line coil made full use of the strong magnetic field below the center of each small magnet and at the adjacent magnets. The designed Rayleigh wave EMAT was fabricated, and the experimental results revealed that the new design of the Rayleigh wave EMAT increased the received signal by 57.9% compared with the conventional Rayleigh wave EMAT.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1109/TUFFC.2019.2956711 | DOI Listing |
Soft Matter
January 2025
Department of Mechanical Engineering, Clemson University, Clemson, SC 29634, USA.
Instabilities in the form of periodic or irregular waves at the fluid interface have been demonstrated in microchannel electrokinetic flows with conductivity gradients when the applied electric field is above a threshold value. Most prior studies on electrokinetic instabilities (EKI) are restricted to Newtonian fluids though many of the chemical and biological samples in microfluidic applications exhibit non-Newtonian characteristics. We present in this work an experimental study of the effects of fluid shear thinning on the development of EKI waves through the addition of a small amount of xanthan gum (XG) polymer to both the high- and low-concentration Newtonian buffer solutions.
View Article and Find Full Text PDFLab Chip
January 2025
Key Laboratory of Biomedical Engineering of Ministry of Education, Department of Biomedical Engineering, Zhejiang University, Hangzhou, 310027, China.
The utilization of acoustic fields offers a contactless approach for microparticle manipulation in a miniaturized system, and plays a significant role in medicine, biology, chemistry, and engineering. Due to the acoustic radiation force arising from the scattering of the acoustic waves, small particles in the Rayleigh scattering range can be trapped, whilst their impact on the acoustic field is negligible. Manipulating larger particles in the Mie scattering regime is challenging due to the diverse scattering modes, which impacts the local acoustic field.
View Article and Find Full Text PDFSensors (Basel)
November 2024
School of Automation, Beijing Information Science and Technology University, Beijing 100192, China.
Surface angled cracks on critical components in high-speed machinery can lead to fractures under stress and pressure, posing a significant threat to the operational safety of equipment. To detect surface angled cracks on critical components, this paper proposes a "Quantitative Detection Method for Surface Angled Cracks Based on Full-field Scanning Data". By analyzing different ultrasonic signals in the full-field scanning data from laser ultrasonics, the width, angle, and length of surface angled cracks can be determined.
View Article and Find Full Text PDFNanophotonics
November 2024
School of Electronic Engineering, Guangxi University of Science and Technology, Liuzhou, Guangxi 545006, China.
We report a transverse optical torque exerted on a conventional isotropic spherical particle in a direction perpendicular to that of the illuminating wave propagation. By using full-wave simulations and deriving an analytical expression of the transverse optical torque for particle of arbitrary size, the origin of this transverse optical torque is traced exclusively to the magnetic part of the spin angular momentum, regardless of the size and composition of the illuminated particle. To our surprise, for a non-magnetic dielectric particle, the transverse optical torque is found to originate mainly from the magnetic response of the particle, even when the particle size is much smaller than the illuminating wavelength.
View Article and Find Full Text PDFNanophotonics
January 2024
Department of Mechanical Science & Engineering, University of Illinois at Urbana-Champaign, Urbana, IL 61801, USA.
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!