Converting CO into useful chemicals through an electrocatalytic process is an attractive solution to reduce CO in the atmosphere. However, the process suffers from high overpotential, low activity, or poor product selectivity. In this study, N,S dual-doped carbon nanoweb (NSCNW) materials were proposed as an efficient nonmetallic electrocatalyst for CO reduction. The NSCNW catalysts preferentially and rapidly converted CO into CO with a high Faradaic efficiency of 93.4 % and a partial current density of -5.93 mA cm at a low overpotential of 490 mV. A small Tafel slope value (93 mV dec ) was obtained, demonstrating a high rate for CO reduction. Moreover, the catalysts also exhibited a quite stable current-density profile during 20 h with a high CO Faradaic efficiency above 90 % throughout the electrolysis reaction. The high catalytic performance of the catalysts for CO reduction could be attributed to synergistic effects associated with the structural advantages of 3 D carbon nanoweb structures and effective S doping of the carbon materials with the highest ratio of thiophene-like S to oxidized S species.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1002/cssc.201903117 | DOI Listing |
ACS Appl Mater Interfaces
May 2020
School of Chemical and Biological Engineering, Seoul National University, 1 Gwanak-ro, Gwanak-gu, Seoul 151-742, Republic of Korea.
Research on flexible biosensors is mostly focused on their use in obtaining information on physical signals (such as temperature, heart rate, pH, and intraocular pressure). Consequently, there are hardly any studies on using flexible electronics for detecting biomolecules and biomarkers that cause diseases. In this study, we propose a flexible, three-dimensional carbon nanoweb (3DCNW)-based aptamer sensor to detect the platelet-induced growth factor (PDGF), which is an oncogenic biomarker.
View Article and Find Full Text PDFAcc Chem Res
February 2020
Department of Biotechnology , Delft University of Technology, Van der Maasweg 9 , 2629 HZ Delft , The Netherlands.
Carbon-based products are crucial to our society, but their production from fossil-based carbon is unsustainable. Production pathways based on the reuse of CO will achieve ultimate sustainability. Furthermore, the costs of renewable electricity production are decreasing at such a high rate, that electricity is expected to be the main energy carrier from 2040 onward.
View Article and Find Full Text PDFChemSusChem
February 2020
Department of Chemical Engineering, Pohang University of Science and Technology (POSTECH), 77 Cheongam-ro, Nam-gu, Pohang, Gyeongbuk, 37673, Republic of Korea.
Converting CO into useful chemicals through an electrocatalytic process is an attractive solution to reduce CO in the atmosphere. However, the process suffers from high overpotential, low activity, or poor product selectivity. In this study, N,S dual-doped carbon nanoweb (NSCNW) materials were proposed as an efficient nonmetallic electrocatalyst for CO reduction.
View Article and Find Full Text PDFChemSusChem
February 2019
Department of Chemical Engineering, Pohang University of Science and Technology, Pohang, 37673, South Korea.
Current lithium-ion batteries have a low theoretical capacity that is insufficient for use in emerging electric vehicles and energy-storage systems. The development of lithium-sulfur batteries utilizing Li S cathodes would be a promising option to overcome the capacity limitation. In this work, new three-dimensional (3D) honeycomb-like N-doped carbon nanowebs (HCNs) have been synthesized through a facile aqueous solution route for use as a cathode material in lithium-sulfur batteries.
View Article and Find Full Text PDFNanoscale Res Lett
February 2018
Department of Chemical Engineering, Kangwon National University, Samcheok, 245-711, South Korea.
The macro/microstructures of carbon-based electrode materials for supercapacitor applications play a key role in their electrochemical performance. In this study, hierarchically macroporous graphitic nanowebs (HM-GNWs) were prepared from bacterial cellulose by high-temperature heating at 2400 °C. The HM-GNWs were composed of well-developed graphitic nanobuilding blocks with a high aspect ratio, which was entangled as a nanoweb structure.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!