The demand for air filtration materials in recent years has been substantially increasing on a worldwide scale because people are paying extensive attention to particulate matter (PM) pollution. In this work, we report a type of needle-punched triboelectric air filter (N-TAF) consisting of polytetrafluoroethylene (PTFE) fibers modified by silica nanoparticles and polyphenylene sulfide (PPS) fibers. Compared to conventional electrostatic precipitators, the N-TAF can be charged online by a unique nonwoven processing technology without additional energy consumption and toxic ozone emission. Owing to the triboelectrification effect, a large number of charges were generated during the process of carding and needle-punching, resulting in an increased filtration performance. Benefiting from the addition of silica nanoparticles, the PTFE fibers are endowed with many pores and grooves and substantial surface roughness, which contributes to the enhancement of triboelectrification. As a result, the N-TAF with 2 wt % silica nanoparticles (N-TAF-2) exhibited a high removal efficiency of 89.4% for PM, which is 45% higher than unmodified N-TAF (61.8%), and a low pressure drop of 18.6 Pa. Meanwhile, the decay of the removal efficiency for N-TAF-2 remained at a low level (6.4%) for 60 days. More importantly, N-TAF-2 could realize a high efficiency of 99.7% and a low pressure drop of 55.4 Pa at a high surface density. In addition, the washed N-TAF has an excellent charge regeneration performance via air blowing or manual rubbing, thus recovering the removal efficiency easily and rapidly. Ultimately, the powerful dust holding capacity (227 g m) for N-TAF-2 indicates that the filter has a long service life, which makes it a promising air purification material. The filter reported in this work has the potential to be practically applied to air purification fields because it has excellent filtration performance and is easy to be produced on a large industrial scale.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1021/acsami.9b18341 | DOI Listing |
Langmuir
January 2025
School of Chemistry, Key Centre for Polymers and Colloids, The University of Sydney, Sydney, New South Wales 2006, Australia.
Polymer Janus nanoparticles with one hard cross-linked polystyrene lobe and one soft film-forming poly(methyl methacrylate--butyl acrylate) lobe were synthesized by reversible addition-fragmentation chain transfer (RAFT)-mediated emulsion polymerization. The Janus nanoparticles adsorbed to oil/water and air/water interfaces, where the soft lobes coalesced, forming films of thickness between 25 and 250 nm; droplets of silicone oil could be stably encapsulated in polymer in this way. When prepared by mechanical mixing without additives, capsules of diameter 5-500 μm could be prepared, and with additives and application of heat, capsules of diameter around 5 μm were achieved, even with highly viscous silicone oil (20,000 cSt).
View Article and Find Full Text PDFJ Phys Chem C Nanomater Interfaces
January 2025
Department of Physics and Astronomy, University of Exeter, Exeter EX4 4QL, U.K.
Many different types of nanoparticles have been developed for photothermal therapy (PTT), but directly comparing their efficacy as heaters and determining how they will perform when localized at depth in tissue remains complex. To choose the optimal nanoparticle for a desired hyperthermic therapy, it is vital to understand how efficiently different nanoparticles extinguish laser light and convert that energy to heat. In this paper, we apply photothermal mass conversion efficiency (η ) as a metric to compare nanoparticles of different shapes, sizes, and conversion efficiencies.
View Article and Find Full Text PDFOptomechanical cavities can be used as highly sensitive mass sensors actuated by an optical field. In this work, we introduce and numerically demonstrate a new design for an optomechanical cavity consisting of a series of asymmetrically distributed rectangular silicon nanobricks, with each brick acting as an independent mechanical resonator but all coupled to the same optical field. Each silicon brick is placed on top of a thin silica pillar that ensures mechanical support whilst providing enough acoustic isolation between the individual mechanical resonances - at GHz frequencies - of each brick.
View Article and Find Full Text PDFColloids Surf B Biointerfaces
January 2025
Shaanxi Key Laboratory of Catalysis, School of Chemistry and Environment Science, Shaanxi University of Technology, No.1 East 1st Ring Road, Hanzhong, Shaanxi 723001, PR China.
The advantages of large surface area, high volume ratio, good biocompatibility, and controllable surface functionalization make hollow mesoporous silica nanoparticles (HMSNs) an ideal drug carrier. HMSNs can achieve high efficiency, targeting, and controlled release by adjusting the microstructure and surface modification of its particles, which makes it broad application prospects in the field of medical therapy, especially in cancer therapy. Numerous studies have shown that preparation method, shape, particle size, hollow inner diameter, aperture and wall thickness of the HMSNs, the characteristics of the drugs, the interaction between the drugs and the carriers, and the external environment all closely affect the drug delivery, release, and efficacy.
View Article and Find Full Text PDFComput Struct Biotechnol J
December 2024
Environmental Intelligence Unit, Flemish Institute for Technological Research (VITO), Boeretang 200, Mol 2400, Belgium.
Exposure of lung epithelia to aerosols is omnipresent. Chronic exposure to polluted air is a significant factor in the development of pulmonary diseases, which are among the top global causes of death, including COVID-19, chronic obstructive pulmonary disease, lung cancer, and tuberculosis. As efforts to prevent and treat lung diseases increase, the development of pulmonary drug delivery systems has become a major area of interest.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!