This study investigates the temperature reduction capacity and water consumption of a fan-pad system installed in a greenhouse located in the coastal regions of Almería. The suitability of this system for coastal zones with high environmental humidity during the summer is analyzed. Historical temperature and relative humidity series are studied, obtaining the thermal difference and maximum, medium, and minimum monthly water consumption of the pads based on the operation data of the pads. Despite the high relative humidity of the air in the hottest hours of the day, a decrease of 5.92 °C in the mean temperature and a water consumption of 13.55 l/h per square meter of an evaporative cooling pad are obtained in the month of August. Additionally, the operation of a cellulose evaporative cooling pad installed for 3 years in a greenhouse is analyzed in a wind tunnel and compared with that of a new pad of the same model. Over time and with low maintenance, the porosity of the pad decreases due to salt incrustation. The salt incrustation makes airflow more difficult in the pad, increasing the pressure drop by 170.04%; however, the air saturation efficiency of the pad increases by 6.6% due to the greater contact time between the air and the water.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6926749 | PMC |
http://dx.doi.org/10.3390/ijerph16234690 | DOI Listing |
Glob Chang Biol
January 2025
Department of Civil, Environmental, and Geo-Engineering, University of Minnesota, Minneapolis, Minnesota, USA.
Stomata control plant water loss and photosynthetic carbon gain. Developing more generalized and accurate stomatal models is essential for earth system models and predicting responses under novel environmental conditions associated with global change. Plant optimality theories offer one promising approach, but most such theories assume that stomatal conductance maximizes photosynthetic net carbon assimilation subject to some cost or constraint of water.
View Article and Find Full Text PDFNano Lett
January 2025
School of Nanoscience and Materials Engineering, Henan University, Zhengzhou, Henan 450046, China.
Spray cooling, which dissipates heat through droplet evaporation, is an efficient cooling method. Using seawater instead of freshwater in spraying is appealing given the intensifying global water crisis. However, seawater-based cooling suffers from salt accumulation on hot surfaces.
View Article and Find Full Text PDFAnimals (Basel)
January 2025
Departament of Agricultural Engineering, Universidade Federal de Viçosa, Viçosa 36570-900, Brazil.
Heat stress in animals affects productivity, health, and reproduction, with particularly pronounced effects in dairy cows. Identifying heat stress requires understanding both physiological and environmental indicators, such as increased heart rate, respiratory rate, and rectal temperature, which reflect the animal's thermal condition within its environment. Thermoregulation in cows involves behavioral and physiological adjustments to maintain homeothermy, aiming to stabilize their internal thermal state.
View Article and Find Full Text PDFCarbohydr Polym
March 2025
State Key Laboratory of Fine Chemicals, Dalian University of Technology, Dalian 116024, China. Electronic address:
Thermochromic smart windows have been widely developed for building energy saving. However, most smart windows suffer from limited energy-saving performance, fixed phase transition temperature, and are not suitable for the temperature regulation needs of different application scenarios. Herein, a unique self-adaptive thermochromic hydrogel (HBPEC-PNA) with self-moisture-absorbing performance is reported that assembles solar energy cooling and evaporative heat dissipation.
View Article and Find Full Text PDFInt J Pharm
January 2025
Laboratory of Pharmaceutical Technology, Division of Pharmaceutical Technology, School of Pharmacy, Faculty of Health Sciences, Aristotle University of Thessaloniki, 541 24 Thessaloniki, Greece; Natural Products Research Centre of Excellence-AUTH (NatPro-AUTH), Center for Interdisciplinary Research and Innovation (CIRI-AUTH), Thessaloniki 57001, Greece. Electronic address:
Amorphous solid dispersions (ASDs) are widely recognized for their potential to enhance the solubility of poorly water-soluble drugs, with factors such as molecular mobility, intermolecular interactions, and storage conditions playing critical roles in their performance. However, the influence of preparation methods on their performance remains underexplored, especially regarding their supersaturation . To address this gap, the present study systematically investigates ASDs of ibuprofen (IBU, used as a model drug) prepared using two widely utilized techniques (solvent evaporation, SE, and melt-quench cooling, M-QC).
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!