Various nickel and magnesium dual-doped LiNiMgMnO (x ≤ 0.15) were synthesized via a modified solid-state combustion method. All as-prepared samples show typical spinel phase with a well-defined polyhedron morphology. The Ni-Mg dual-doping obviously decreases the lattice parameter that gives rise to the lattice contraction. Owing to the synergistic merits of metal ions co-doping, the optimized LiNiMgMnO delivers high initial capacity of 115.9 and 92.9 mAh·g, whilst retains 77.1 and 69.7 mAh·g after 1000 cycles at 1 C and high current rate of 20 C, respectively. Even at 10 C and 55 °C, the LiNiMgMnO also has a discharge capacity of 92.2 mAh·g and endures 500 cycles long-term life. Such excellent results are contributed to the fast Li diffusion and robust structure stability. The anatomical analysis of the 1000 long-cycled LiNiMgMnO electrode further demonstrates the stable spinel structure via the mitigation of Jahn-Teller effect. Hence, the Ni-Mg co-doping can be a potential strategy to improve the high-rate capability and long cycle properties of cathode materials.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6856166 | PMC |
http://dx.doi.org/10.1038/s41598-019-53494-7 | DOI Listing |
ACS Catal
January 2025
Department of Surface and Plasma Science, Faculty of Mathematics and Physics, Charles University, V Holešovičkách 2, 180 00 Prague 8, Czech Republic.
Achieving the optimal balance between cost-efficiency and stability of oxygen reduction reaction (ORR) catalysts is currently among the key research focuses aiming at reaching a broader implementation of proton-exchange membrane fuel cells (PEMFCs). To address this challenge, we combine two well-established strategies to enhance both activity and stability of platinum-based ORR catalysts. Specifically, we prepare ternary PtNi-Au alloys, where each alloying element plays a distinct role: Ni reduces costs and boosts ORR activity, while Au enhances stability.
View Article and Find Full Text PDFSmall
January 2025
Institute of Electronic Structure and Laser, Foundation for Research and Technology-Hellas, Vassilika Vouton, Heraklion, 70013, Greece.
Metal halide perovskites (MHPs) have attracted significant attention owing to their simple manufacturing process and unique optoelectronic properties. Their reversible electrical or optical property changes in response to oxidizing or reducing environments make them prospective materials for gas detection technologies. Despite advancements in perovskite-based sensor research, the mechanisms behind perovskite-gas interactions, vital for sensor performance, are still inconclusive.
View Article and Find Full Text PDFSmall
January 2025
Key Laboratory for Ultrafine Materials of Ministry of Education, School of Chemical Engineering, East China University of Science and Technology, Shanghai, 200237, China.
The rational design of efficient electrocatalysts with controllable structure and composition is crucial for enhancing the lifetime and cost-effectiveness of oxygen reduction reaction (ORR). PtCo nanocrystals have gained attention due to their exceptional activity, yet suffer from stability issues in acidic media. Herein, an active and highly stable electrocatalyst is developed, namely 3D PtCo@Pt core-shell nanodendrites (NDs), which are formed through the self-assembly of small Pt nanoparticles (≈6 nm).
View Article and Find Full Text PDFNature
January 2025
School of Environment and Energy, State Key Laboratory of Luminescent Materials and Devices, Guangdong Provincial Key Laboratory of Atmospheric Environment and Pollution Control, South China University of Technology, Guangzhou, China.
Lithium (Li) metal batteries (LMBs) are promising for high-energy-density rechargeable batteries. However, Li dendrites formed by the reaction between highly active Li and non-aqueous electrolytes lead to safety concerns and rapid capacity decay. Developing a reliable solid-electrolyte interphase is critical for realizing high-rate and long-life LMBs, but remains technically challenging.
View Article and Find Full Text PDFSci Rep
January 2025
College of Civil Engineering, Department of Bridge Engineering, Tongji University, Shanghai, 200092, China.
Addressing environmental challenges such as pollution and resource depletion requires innovative industrial and municipal waste management approaches. Cement production, a significant contributor to greenhouse gas emissions, highlights the need for eco-friendly building materials to combat global warming and promote sustainability. This study evaluates the simultaneous use of Sugarcane Bagasse Ash (SCBA) and Stone Dust (SD) as partial replacements by volume for cement and sand, respectively, at varying ratios in eco-strength concrete mixes designed for 28 MPa (ES-28) and 34 MPa (ES-34), emphasizing their economic and environmental benefits.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!