Optimizing nanocarbon shell in zero-valent iron nanoparticles for improved electron utilization in Cr(VI) reduction.

Chemosphere

Integrated Composites Laboratory (ICL), Department of Chemical & Biomolecular Engineering, University of Tennessee, Knoxville, United States. Electronic address:

Published: March 2020

A core-shell structured zero-valent iron@carbon (ZVI@C) nanocompoiste was designed to improve the electron utilization of ZVI in the Cr(VI) reduction. The porosity of carbon layer in ZVI@C was optimized for improving the efficiency of electron utilization of ZVI in the Cr(VI) reduction process. The porous structure of carbon layer was controllably synthesized by adjusting the carbon source and the ratio of C/Fe in the precursor. The glucose was suggested as the optimal carbon source, and a high specific surface area (37.067 m/g) was reached for the prepared ZVI@C when the ratio of C/Fe was controlled at 20. These ZVI@C performed well on Cr(VI) reduction, e.g. a complete reduction of Cr(VI) (2 mg/L) to Cr(III) within 10 min. The removal capacity (800 mg/g) exceeded previously recorded ZVI based adsorbents. The pH and initial Cr(VI) concentration were demonstrated as the key factors for the efficient electron utilization of ZVI. Furthermore, the efficiency of electron utilization of the ZVI increased up to 80% when the concentration of Cr(VI) was 2000 mg/L and the pH was controlled at 3, which was much higher than 8% of the naked ZVI.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.chemosphere.2019.125235DOI Listing

Publication Analysis

Top Keywords

electron utilization
20
crvi reduction
16
utilization zvi
16
zvi crvi
8
carbon layer
8
efficiency electron
8
carbon source
8
ratio c/fe
8
crvi
7
zvi
6

Similar Publications

The low sulfur selectivity of Fe-based HS-selective catalytic oxidation catalysts is still a problem, especially at a high O content. This is alleviated here through anchoring FeO nanoclusters on UiO-66 via the formation of Fe-O-Zr bonds. The introduced FeO species exist in the form of Fe and Fe.

View Article and Find Full Text PDF

Graphene quantum dots (GQDs) are highly valued for their chemical stability, tunable size, and biocompatibility. Utilizing green chemistry, a microwave-assisted synthesis method was employed to produce water-soluble GQDs from Mangifera Indica leaf extract. This approach is efficient, cost-effective, and environmentally friendly, offering reduced reaction times, energy consumption, and uniform particle sizes, and has proven advantageous over other methods.

View Article and Find Full Text PDF

Using potentiometric testing, we investigated the zeta potential of shield muck curing materials' particle surfaces, varying the concentration of metal ion complex. We analyzed the microscopic characteristics of shield muck curing products by using the electron microscopy, revealing the impact of metal ion complex on curing. Results showed that the metal ion complex significantly reduces the surface zeta potential of shield muck and conventional curing materials, with cement showing the most substantial effect, followed by shield muck, calcium carbonate, and calcium sulfate.

View Article and Find Full Text PDF

The generation of radicals through photo-Fenton-like reactions demonstrates significant potential for remediating emerging organic contaminants (EOCs) in complex aqueous environments. However, the excitonic effect, induced by Coulomb interactions between photoexcited electrons and holes, reduces carrier utilization efficiency in these systems. In this study, we develop Cu single-atom-loaded covalent organic frameworks (Cu/COFs) as models to modulate excitonic effects.

View Article and Find Full Text PDF

Biomimetic Confined Assembly of Plasmonic CuS from Electronic Waste for Rapid Photothermal Disinfection.

ACS Nano

January 2025

State Key Laboratory of Pollution Control and Resources Reuse, College of Environmental Science and Engineering, Tongji University, Shanghai 200092, China.

Photothermal disinfection (PTD) offers promising potential for water purification due to its sustainable and broad-spectrum bactericidal properties, although it is hindered by slow charge separation in photosensitizers. Herein, we present a plasma-mediated PTD technique utilizing an efficient localized heating effect induced by incident light at specific wavelengths for rapid bacterial inactivation. A metallic CuS photosensitizer, derived from electronic waste through a biomimetic transmembrane confined-assembled strategy, facilitates collective and coherent oscillation of free electrons around Cu atoms in the near-infrared range.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!