Hierarchically nanostructured silicon was produced by regenerative electroless etching (ReEtching) of Si powder made from pulverized anodized porous silicon. This material is characterized by ∼15 nm mesopores, into the walls of which tortuous 2-4 nm pores have been introduced. The walls are sufficiently narrow that they support quantum-confined crystallites that are photoluminescent. With suitable parameters, the ReEtching process also provides control over the emission color of the photoluminescence. Ball milling and hydrosilylation of this powder with undecylenic acid produces nanoparticles with hydrodynamic diameter of ∼220 nm that exhibit robust and bright luminescence that can be excited with either one ultraviolet/visible photon or two near-infrared photons. The long-lived, robust visible photoluminescence of these chemically passivated porous silicon nanoparticles is well-suited for bioimaging and theranostic applications.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/acsnano.9b05740 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Choline Oxidase-Incorporated ATRP-Based Cerium Nanogels as Nanozymes for Colorimetric Detection of Hydrogen Peroxide and Choline.
Biosensors (Basel)
November 2024
Department of BioNano Technology, Gachon University, 1342 Seongnamdae-ro, Sujeong-gu, Seongnam 13120, Republic of Korea.
Choline is an important molecule in monitoring food safety and infant nutrition. Here, we report Ce nanogels synthesized by atom transfer radical polymerization (ATRP) employing Ce-coordinated acryloyl-lysine polymer brushes (Ce@SiO NGs) as highly efficient cascade nanozymes for colorimetric detection of choline. The synthesized Ce@SiO NGs demonstrated remarkable peroxidase-like activity with a porous exterior, which are essential to entrap choline oxidase (COx) to yield COx@Ce@SiO NGs and construct a cascade reaction system to detect choline.
View Article and Find Full Text PDFLong term porosity of solid electrolyte interphase on model silicon anodes with liquid battery electrolytes.
Commun Chem
December 2024
Department of Energy and Petroleum Engineering, University of Stavanger, Stavanger, Norway.
A stable solid electrolyte interphase (SEI) is of great importance for battery electrodes in terms of cycling as well as for its shelf life. While SEI formation on silicon anodes is generally only studied after the first charge and discharge of cells and initial reaction of electrolyte, we show the formation of a liquid/solid SEI in symmetric cells with silicon electrodes in contact with carbonate and glyme-based electrolytes under close to open circuit conditions and its behavior during long-term ageing. Activation energies of SEIs were measured via temperature-dependent electrochemical impedance spectroscopy (EIS) to study the contribution of liquid/solid phases to ion transport.
View Article and Find Full Text PDFAmphiphilic Photoluminescent Porous Silicon Nanoparticles as Effective Agents for Ultrasound-Amplified Cancer Therapy.
ACS Appl Mater Interfaces
December 2024
Faculty of Physics, Lomonosov Moscow State University, Leninskie Gory 1, 119991 Moscow, Russian Federation.
This study investigates the use of photoluminescent amphiphilic porous silicon nanoparticles (αϕ-pSiNPs) as effective ultrasound (US) amplifiers for cancer sonodynamic theranostics. αϕ-pSiNPs were synthesized via a novel top-down approach involving porous silicon (pSi) films electrochemical etching, borate oxidation, and hydrophobic coating with octadecylsilane (C18), resulting in milling into nanoparticles with hydrophilic exteriors and hydrophobic interiors. These properties promote gas trapping and cavitation nucleation, significantly lowering the US cavitation threshold and resulting in selective destruction of cancer cells in the presence of nanoparticles.
View Article and Find Full Text PDFCorrection: Symmetrical Ligand's Fabricated Porous Silicon Surface Based Photoluminescence Sensor for Metal Detection and Entrapment.
J Fluoresc
December 2024
Advanced Radiation Technology Institute (ARTI), Korea Atomic Energy Research Institute, Jeongeup, 56212, Republic of Korea.
Effects of Multiple Factors on the Compressive Strength of Porous Ceramsite Prepared from Secondary Aluminum Dross.
Materials (Basel)
November 2024
State Key Laboratory of Environmental Benchmarks and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing 100012, China.
Aluminum is one of the most in-demand nonferrous metals in the world. The secondary aluminum dross (SAD) produced during aluminum smelting is a type of solid waste that urgently requires disposal. SAD, municipal solid waste incineration fly ash, and bottom slag were used as raw materials to prepare porous ceramsite in a laboratory in this study.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!