Inch-sized aligned polymer nanofiber films with embedded CHNHPbBr nanocrystals: electrospinning fabrication using a folded aluminum foil as the collector.

Nanotechnology

Beijing Engineering Research Center of Cellulose and Its Derivatives, School of Materials Science and Engineering, Beijing Institute of Technology, Beijing, 100081, People's Republic of China.

Published: February 2020

Perovskite nanocrystal embedded polymer nanofibers with polarized emissions are interesting materials for down-shifting applications. By using a folded aluminum foil as a collector, we fabricated inch-size aligned polymer nanofiber films with embedded CHNHPbBr nanocrystals by adapting an electrospinning technique. It was found that the addition of an appropriate amount of cyanoethyl cellulose (CEC) makes the dispersion of MAPbBr in the nanofibers more uniform. Using a precursor solution with MAPbBr of 10% and CEC of 1 wt%, the resulting nanofiber films show strong polarized emission with quantum yields up to 51%. The emission dichroic ratio and emission polarization ratio can reach 5.21 and 0.43, respectively. These polarized emissive films can be potentially applied as down converters for liquid crystal display backlights and other polarization selective photonic devices.

Download full-text PDF

Source
http://dx.doi.org/10.1088/1361-6528/ab52acDOI Listing

Publication Analysis

Top Keywords

nanofiber films
12
aligned polymer
8
polymer nanofiber
8
films embedded
8
embedded chnhpbbr
8
chnhpbbr nanocrystals
8
folded aluminum
8
aluminum foil
8
foil collector
8
inch-sized aligned
4

Similar Publications

Infected burn wounds present significant clinical challenges due to delayed healing and risk of infection, necessitating advanced treatments that offer both antimicrobial and regenerative properties. This study aimed to develop and evaluate multifunctional electrospun nanofiber films incorporating rhamnose (as an angiogenic agent) and therapeutic agents, namely fluticasone, mupirocin, ciprofloxacin, and silver sulfadiazine, for the enhanced healing of infected burn wounds. Nanofibers containing rhamnose, polyacrylonitrile, polyvinyl alcohol and therapeutic agents were fabricated electrospinning.

View Article and Find Full Text PDF

Room-temperature and recyclable preparation of cellulose nanofibers using deep eutectic solvents for multifunctional sensor applications.

Int J Biol Macromol

January 2025

State Key Lab for Hubei New Textile Materials and Advanced Processing Technology, College of Materials Science & Engineering, College of Textile Science & Engineering, Wuhan Textile University, 430200 Wuhan, China. Electronic address:

Cellulose nanofibers (CNFs) have gained increasing attention due to their robust mechanical properties, favorable biocompatibility, and facile surface modification. However, green and recyclable CNF production remains challenging. Herein, a green, low-cost and room-temperature strategy was developed to exfoliate CNFs using deep eutectic solvents.

View Article and Find Full Text PDF

In recent years, increased attention has been given to the effective use of chitin nanofibers (ChNFs). We have developed a method to fabricate thinner chitin nanomaterials, called scale-down chitin nanofibers (SD-ChNFs), by a bottom-up procedure at the nanoscale level, with subsequent disintegration by electrostatic repulsion. The surface modification of SD-ChNFs is anticipated to provide new properties and functions for their practical applications.

View Article and Find Full Text PDF

In situ growth of defective ZIF-8 on TEMPO-oxidized cellulose nanofibrils for rapid response release of curcumin in food preservation.

Carbohydr Polym

March 2025

Liaoning Key Lab of Lignocellulose Chemistry and BioMaterials, Liaoning Collaborative Innovation Center for Lignocellulosic Biorefinery, College of Light Industry and Chemical Engineering, Dalian Polytechnic University, Dalian 116034, China. Electronic address:

Uncontrolled release of active agents in active packaging reduces antimicrobial efficacy, hindering the effective protection of perishable products from microbial infection. Herein, a novel defective engineering was proposed to design defective and hollow ZIF-8 structures grown on TEMPO oxidized cellulose nanofibrils (TOCNFs) and use them as fast-reacting nanocarriers for loading and controlled release curcumin (Cur) in sodium alginate (SA) active packaging systems (CZT-Cur-SA). By employing stable chelation between tannic acid (TA) and ZIF-8 zinc ions, the connections between zinc ions and imidazole ligands were severed to form a loose and hollow structure, which facilitates the rapid reaction and release of active ingredients triggered by pH changes in the microenvironment.

View Article and Find Full Text PDF

Mulberry silk (Bombyx mori) and eri silk (Samia/Philosamia ricini) are widely used silks. Eri silk is a wild silk that contains an arginine-glycine-aspartic acid tripeptide sequence within its structure, making it a potential and sustainable biomaterial. However, its poor solubility using conventional methods has resulted in limited research compared with that of mulberry silk fibroin.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!