Si@SnS -Reduced Graphene Oxide Composite Anodes for High-Capacity Lithium-Ion Batteries.

ChemSusChem

Fundamental Science on Nuclear Wastes and Environmental Safety Laboratory, Southwest University of Science and Technology, Mianyang, Sichuan, 621010, P. R. China.

Published: December 2019

One of the key challenges for the development of lithium-ion batteries is the preparation of high-performance anode materials. In this paper, a micro/nanostructured Si@SnS -rGO composite is reported in which Si nanoparticles with a particle size of 30 nm are electrostatically anchored on a 3D reduced graphene oxide (rGO) network and mixed with SnS . The step-wise lithiation/delithiation of SnS provided space-constraining effects to accommodate volume expansion and particle aggregation, thereby alleviating the volume expansion of Si during cycling as well as enhancing the structural stability, whereas the rGO in the 3D network stabilized the composite. The composite had a high specific capacity of 1480.1 mAh g after 200 cycles at a current density of 200 mA g and a high stability at rates of 200-3000 mA g . The capacity attenuation after cycling was only 89.18 %. A stable specific capacity (425.5 mAh g ) was achieved after 600 cycles at a current density of 3000 mA g . Therefore, the micro/nanostructured Si@SnS -rGO composite is a promising anode material for use in lithium-ion batteries.

Download full-text PDF

Source
http://dx.doi.org/10.1002/cssc.201902839DOI Listing

Publication Analysis

Top Keywords

lithium-ion batteries
12
graphene oxide
8
micro/nanostructured si@sns
8
si@sns -rgo
8
-rgo composite
8
rgo network
8
volume expansion
8
specific capacity
8
current density
8
composite
5

Similar Publications

Sn-based electrodes are promising candidates for next-generation lithium-ion batteries. However, it suffers from deleterious micro-structural deformation as it undergoes drastic volume changes upon lithium insertion and extraction. Progress in designing these materials is limited to complex structures.

View Article and Find Full Text PDF

Traditional hydrometallurgy methods for recycling the spent lithium-ion battery materials face some challenges, including the complex processes, and difficulties in separating Ni/Co/Mn. To address these issues, this work proposes a simple one-pot method to achieve a high Li leaching efficiency (99.2%) and simultaneously transform the majority of Ni (99.

View Article and Find Full Text PDF

Attributable to sulfur's significant theoretical energy density, its affordability, and its environmentally friendly nature, lithium-sulfur batteries (LSBs) are recognized as advanced energy storage technologies with considerable potential. Nonetheless, the solubility and migration of polysulfides within the electrolyte substantially hinder their practical implementation. To address this issue, we developed a nitrogen-doped two-dimensional (2D) wavy carbon nanosheet material (NCN) by using the Pickering emulsion templating method.

View Article and Find Full Text PDF

High selectivity, capacity and stability for electrochemical lithium extraction on boron-doped HMnO by tailoring lattice constant and intercalation energy.

Water Res

January 2025

State Key Laboratory of Chemo/Biosensing and Chemometrics, College of Chemistry and Chemical Engineering, Hunan University, Changsha 410082, PR China; College of Environment and Resources, Xiangtan University, Xiangtan, Hunan 411105, PR China. Electronic address:

A sustainable supply of lithium from salt-lake brines is necessary due to the surge in demand of the lithium-battery market. However, the presence of coexisting ions, particularly Na, poses a significant challenge due to the similarities in charge, electronic structure, and hydrated size. The electrochemical system with manganese (Mn)-based lithium-ion (Li) sieves electrodes is a promising method for Li recovery, but often suffers from geometric configuration distortion, which reduces their selectivity and capacity.

View Article and Find Full Text PDF

Activated Graphite with Richly Oxygenated Surface from Spent Lithium-Ion Batteries for Microwave Absorption.

Small

January 2025

School of Materials and Physics & Center of Mineral Resource Waste Recycling, China University of Mining and Technology, Xuzhou, Jiangsu, 221116, China.

Designing spent graphite anodes from lithium-ion batteries (LIBs) for applications beyond regenerated batteries offers significant potential for promoting the recycling of spent LIBs. The battery-grade graphite, characterized by a highly graphitized structure, demonstrates excellent conductive loss capabilities, making it suitable for microwave absorption. During the Li-ion intercalation and deintercalation processes in battery operation, the surface layer of spent graphite (SG) becomes activated, forming oxygen-rich functional groups that enhance the polarization loss mechanism.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!