An amorphous InZnO/MoS heterojunction-based phototransistor with excellent photoconductive gain and responsivity over the entire visible range has been demonstrated. The photogenerated current of the InZnO phototransistor at long light wavelength (>600 nm) was significantly improved by utilizing narrow bandgap MoS as the capping layer (1.3 eV). At lower wavelength, photocarriers are generated due to the optical absorption of both InZnO and MoS layers, whereas the latter ensures significant photocarrier generation even at the higher wavelength region of the visible spectrum. The photogenerated carriers subsequently transfer to the underlying InZnO layer of superior carrier mobility that has a high channel conduction of additional electrons from the optically-induced doubly positively charged oxygen vacancies (Vo) where the gate field is screening, thereby leading to the higher photoconductive gain of the InZnO/MoS phototransistors. The dynamic photosensitivity behaviour of the aforesaid phototransistor reveals the presence of persistent photoconductivity (PPC) due to the oxygen vacancy associated with InZnO which can be removed by applying a reset gate pulse from -15 to +5 V. The optical properties of these phototransistors were further enhanced by replacing the opaque Ti/Au electrode by an ultrathin transparent Ti/Au electrode. Utilization of the transparent electrode results in enhanced electron injection from source to channel due to a reduced barrier height under illumination giving rise to a ten-fold improvement in the photocurrent and responsivity of the phototransistors. A position-dependent study of the photocurrent w.r.t beam position also reveals that the enhancement in photocurrent is strongly dependent on the position and is at its maximum when the beam is placed near the source region.

Download full-text PDF

Source
http://dx.doi.org/10.1088/1361-6528/ab4526DOI Listing

Publication Analysis

Top Keywords

ultrathin transparent
8
photoconductive gain
8
ti/au electrode
8
broad spectral
4
spectral responsivity
4
responsivity highly
4
highly photoconductive
4
photoconductive inzno/mos
4
inzno/mos heterojunction
4
phototransistor
4

Similar Publications

Raman spectroscopy is a powerful analytical method widely used in many fields of science and applications. However, one of the inherent issues of this method is a low signal-to-noise ratio for ultrathin and two-dimensional (2D) materials. To overcome this problem, techniques like surface-enhanced Raman spectroscopy (SERS) that rely on nanometer scale metallic particles are commonly employed.

View Article and Find Full Text PDF

Zinc ferrite (ZnFeO, ZFO) has gained attention as a candidate material for photoelectrochemical water oxidation. However, champion devices have achieved photocurrents far below that predicted by its bandgap energy. Herein, strong optical interference is employed in compact ultrathin film (8-14 nm) Ti-doped ZFO films deposited on specular back reflectors to boost photoanode performance through enhanced light trapping, resulting in a roughly fourfold improvement in absorption as compared to films deposited on transparent substrates.

View Article and Find Full Text PDF

As the trajectory toward the graphene era continues, there is a compelling need to harness 2D technology further for the transformation of three-dimensional (3D) materials production and applications. Here, we resolve this challenge for one of the most widely utilized 3D materials in modern electronics─gold─using graphene-inspired fabrication technology that allows us to develop a multistep production method of ultrathin gold films. Such films demonstrate continuous morphology, low sheet resistance (10 Ω/sq), and high transparency (80%), offering opportunities in a variety of technological and scientific sectors.

View Article and Find Full Text PDF

Ultrathin Bioelectrode Array with Improved Electrochemical Performance for Electrophysiological Sensing and Modulation.

ACS Nano

December 2024

Beijing Key Laboratory of Energy Conversion and Storage Materials, College of Chemistry, Beijing Normal University, Beijing 100875, P. R. China.

To achieve high accuracy and effectiveness in sensing and modulating neural activity, efficient charge-transfer biointerfaces and a high spatiotemporal resolution are required. Ultrathin bioelectrode arrays exhibiting mechanical compliance with biological tissues offer such biointerfaces. However, their thinness often leads to a lack of mechano-electrical stability or sufficiently high electrochemical capacitance, thus deteriorating their overall performance.

View Article and Find Full Text PDF

Untethered electrical stimulation or pacing of the heart is of critical importance in addressing the pressing needs of cardiovascular diseases in both clinical therapies and fundamental studies. Among various stimulation methods, light illumination-induced electrical stimulation via photoelectric effect without any genetic modifications to beating cells/tissues or whole heart has profound benefits. However, a critical bottleneck lies in the lack of a suitable material with tissue-like mechanical softness and deformability and sufficient optoelectronic performances toward effective stimulation.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!