Purpose: The aim of this study was to evaluate and compare the 1 year clinical performances of a self-adhering flowable composite and a commercially available self-etch adhesive/composite system in occlusal restorations of primary second molars.
Materials And Methods: Thirty-one patients (10 male, 21 female) were recruited into the study. A total of 62 occlusal cavities were restored with either a universal composite or a self-adhering flowable composite according to manufacturers' instructions. The restorations were clinically evaluated 1 month after placement as baseline, and after 3, 6 months and 1 year post-operatively using modified USPHS criteria by two operators.
Results: Lack of retention was not observed in any of the restorations. With respect to color match, marginal adaptation, secondary caries and surface texture, no significant differences were found between two restorative materials tested after 1 year. None of the restorations had marginal discoloration and anatomic form loss on the 1 year follow-up. Restorations did not exhibit post-operative sensitivity at any evaluation period.
Conclusion: The clinical assessment of self-adhering flowable composite exhibited good clinical results with predominating alpha scores after 1 year. Advantage of the application convenience for children is promising for self-adhered flowable composite materials in pediatric use.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6761486 | PMC |
| http://dx.doi.org/10.26650/eor.20190025 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Roughness Impact of Piezoelectric Dental Scaler on Two Distinct Flowable Composite Filling Materials.
J Vis Exp
January 2025
Faculty of Dentistry, Department of Periodontology, Marmara University;
Dental ultrasonic scalers are commonly employed in periodontal treatment; however, their ability to roughen tooth surfaces is a worry since roughness may increase plaque production, a key cause of periodontal disease. This research studied the influence of a piezoelectric ultrasonic scaler on the roughness of two distinct flowable composite filling materials. To do this, 10 disc-shaped samples were generated from each of the two flowable composite materials.
View Article and Find Full Text PDFDoes the Type of Resin Luting Material Affect the Bonding of CAD/CAM Materials to Dentin?
Dent J (Basel)
January 2025
Department of Restorative Dentistry, Faculty of Dentistry, Yeditepe University, İstanbul 34728, Turkey.
This study aimed to investigate the microtensile bond strength (µTBS) of composite-based (Cerasmart), polymer-infiltrated (Vita Enamic), and feldspathic (Cerec) CAD/CAM blocks luted to dentin using a dual-cure resin cement (LinkForce), as well as micro-hybrid (G-aenial) and flowable composites (G-aenial Universal Flo), and evaluate the microhardness (HV) of luting materials through the CAD/CAM blocks. Cerasmart, Enamic, and Cerec were luted to dentin using three luting materials; LinkForce, G-aenial, and Universal Flo (n = 5). For HV, 117 disk-shaped specimens from LinkForce, G-aenial, and Universal Flo (n = 13) were polymerized through 3 mm thick CAD/CAM.
View Article and Find Full Text PDFAdvancing Orthodontic Aesthetics: Exploring the Potential of Injectable Composite Resin Techniques for Enhanced Smile Transformations.
Dent J (Basel)
December 2024
Department of Life, Health and Environmental Sciences, Postgraduate School of Orthodontics, University of L'Aquila, 67100 L'Aquila, Italy.
The injection moulding technique (IMT) is a minimally invasive restorative treatment. This technique enables the application of thin, flowable composite layers into a stable, transparent silicone index that serves as a mould. Due to the fluid properties of the composite, it efficiently fills the silicone tray and seamlessly integrates with the tooth structure, often obviating tooth preparation and preserving overall tooth integrity.
View Article and Find Full Text PDFEvaluation of the Mechanical Properties of Different Dental Resin-Based Materials After Submersion in Acidic Beverages.
Dent J (Basel)
December 2024
Faculty of Dental Medicine, Grigore T. Popa University of Medicine and Pharmacy Iasi, Str. Universitatii No. 16, 700115 Iasi, Romania.
Article Synopsis
- The study investigated how acidic beverages like coffee, cola, and red wine affect the mechanical properties of four types of dental resin-based materials.
- Results showed that 14 days of exposure to these beverages significantly weakened the microhardness, elasticity, and scratch resistance of the materials.
- Among the materials tested, the conventional nanohybrid composite resin demonstrated the highest resistance to acid damage, followed by heavy-flow and flowable resins, with resin-based sealants being the most affected.
The Effect of Polyethylene Fiber and Flowable Resin Composite on Fracture Resistance in the Restoration of Large MOD Cavities.
J Esthet Restor Dent
January 2025
Department of Restorative Dentistry, Faculty of Dentistry, Kırıkkale University, Kırıkkale, Türkiye.
Objective: This in vitro study aims to evaluate the effect of placing polyethylene fibers used in large Class II MOD (mesio-occlusion-distal) cavities into different flowable resin composites and in different positions on the fracture resistance of the restoration.
Materials And Methods: Ninety healthy human molars were used in the study. No treatment was performed on 10 of these teeth and they were used as the control group.
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!