Waste is a misplaced resource. Herein, anionic (orange II sodium salt and Ponceau 2R) and cationic (Rhodamine B and Methylene blue) dye wastewater assisted photo-treatment (referred as DAPT) method was developed to modify sol-gel synthesized CeO-TiO (CeTi) mixed oxide catalyst. Catalytic activity test results showed that both anionic and cationic dye wastewater could be used as "fuel" of photo-treatment to enhance the activity of CeTi catalyst in NO reduction and dichloromethane oxidation. Characterization and DFT calculation results revealed that DAPT process increased the amount of Ce ions on CeTi samples, which could induce the formation of Ce-V-Ti (oxygen vacancy (V) in Ce-O-Ti short range structure). These Ce-V-Ti defects not only could be adsorption sites for NH, dichloromethane and oxygen, but also promoted the redox shift of Ce+ Ti ⇋ Ce+ Ti by enhancing the oxidizability of Ce and Ti species. Furthermore, defects changed the polarity of Ce-O and Ti-O, which was conducive to the activation of lattice oxygen. All these improvements contributed to the excellent catalytic activity of CeTi catalysts. We expected this work to be instructive on constructing structure-activity over CeO-TiO based catalysts and utilizing dye wastewater.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.chemosphere.2019.07.031DOI Listing

Publication Analysis

Top Keywords

dye wastewater
16
catalytic activity
12
mixed oxide
8
oxide catalyst
8
catalyst reduction
8
reduction dichloromethane
8
dichloromethane oxidation
8
activity ceti
8
utilization dye
4
wastewater
4

Similar Publications

Electrospinning Membrane with Polyacrylate Mixed Beta-Cyclodextrin: An Efficient Adsorbent for Cationic Dyes.

Polymers (Basel)

January 2025

Institute of Textile Auxiliary and Ecological Dyeing Finishing, Nanjing Tech University, 30 South Puzhu Road, Nanjing 211816, China.

A simple and non-chemical binding nanofiber (-CD/PA) adsorbent was obtained by electrospinning a mixture of -cyclodextrin (-CD) and polyacrylate (PA). The cationic dyes in wastewater were removed by the host-guest inclusion complex of the -cyclodextrin and the electrostatic interaction between the polyacrylate and the dyes groups. The influence of the content of -cyclodextrin on the surface morphology and adsorption capacity of the nanofiber membrane was discussed, and the optimized adsorption capacity of nanofiber adsorption material was determined.

View Article and Find Full Text PDF

Degradation of Rhodamine B dye using the mesoporous material KIT-6/TiO photocatalyst obtained by in situ anchoring method.

Environ Sci Pollut Res Int

January 2025

Department of Chemistry, Laboratory of Catalysis, Environment and Materials, State University of Rio Grande Do Norte, 59610-210, Mossoró, Rio Grande Do Norte, Brazil.

In this study, a novel synthesis approach was employed to create the KIT-6/TiO photocatalyst with different ratios of Si/Ti. The results of the X-ray diffraction revealed that incorporating TiO with the anatase phase maintained the mesoporous structure of KIT-6 (Korean Institute of Technology 6). The scanning electron microscope and transmission electron microscope images exhibited unobstructed mesopores, validating their anchoring within the internal structure of the support.

View Article and Find Full Text PDF

Tailoring amino-functionalized n-alkyl methacrylate ester-based bio-hybrids for adsorption of methyl orange dye: Controllable macromolecular architecture via polysaccharide-integrated ternary copolymerization.

Int J Biol Macromol

January 2025

Istanbul Technical University, Faculty of Science and Letters, Department of Chemistry, Soft Materials Research Laboratory, 34469, Maslak, Istanbul, Turkey. Electronic address:

Controllable macromolecular architecture formation via polysaccharide integrated ternary copolymerization was explored in the design of amino-functionalized n-alkyl methacrylate ester-based biohybrids. Ternary poly(dimethylaminoethyl methacrylate-co-glycidyl methacrylate-co-hydroxypropyl methacrylate)/sodium-alginate, PDGH/ALG, hybrids were designed using anionic polysaccharide through in-situ radical polymerization. An insight into the effect of ALG on physicochemical structure of ternary hybrids, particularly the interactions between polymeric chains, was created.

View Article and Find Full Text PDF

Bio-green synthesis of bismuth oxide nanoparticles using almond gum for enhanced photocatalytic degradation of water pollutants and biocompatibility.

Int J Biol Macromol

January 2025

Center of Excellence for Research in Engineering Materials (CEREM), Deanship of Scientific Research, King Saud University, Riyadh 11421, Saudi Arabia. Electronic address:

The discharge of dye-contaminated industrial wastewater is a significant source of water and soil pollution. The eco-friendly synthesis of multifunctional bismuth oxide nanoparticles (BiO-NPs) offers a promising approach for the removal of toxic contaminants. The incorporation of natural polymers in nanoparticle production has gained significant scientific attention due to their environmentally friendly and efficient properties.

View Article and Find Full Text PDF

Although various biochars from different biomass materials have been developed to remediate dye-contaminated environments, the removal capabilities of pristine biochar for dyes urgently require further enhancement due to insufficient surface adsorption sites. To introduce more adsorption sites, this work proposes a simple approach to fabricate coconut shell biochar (CSB) based adsorbent by anchoring zeolitic imidazolate framework-8 (ZIF-8) via the active sites provided by polydopamine (PDA)-coated CSB. The nucleation sites provided by the PDA layer promote the dispersion of ZIF-8 on the surface of CSB, resulting in sufficient adsorption sites for removing malachite green (MG) and rhodamine B (RB) from wastewater.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!