The adsorption of Cu(II) ions by biochar fibres prior and after modification with 2-thiouracil on real and artificial samples has been studied by batch-type adsorption experiments, FTIR and XPS spectroscopy and competition reactions using U(VI) ions as competitor cations. The experimental data of the artificial samples clearly show that the modified material presents extraordinary higher affinity for Cu(II) ions even in the acidic pH range, the spectroscopic data indicate the formation of inner-sphere complexes and the competition reactions significantly higher selectivity of the 2-thiouracil modified biochar fibres for Cu(II). The 2-thiouracil-modified biochar fibres have been successfully applied to acid mine drainage (AMD) samples regarding the selective separation of Cu(II) ions from "real" samples. Regarding the desorption of copper from the biochar surface, although 100% copper recovery was achieved by eluting the metal ion using 1 M HNO3, the deterioration of the modified biochar fibers due to extensive 2-thiouracil release from the biochar surface limits the applicability of the present adsorbent in routine and large-scale applications.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.jhazmat.2019.120950DOI Listing

Publication Analysis

Top Keywords

biochar fibres
16
competition reactions
12
cuii ions
12
reactions uvi
8
artificial samples
8
modified biochar
8
biochar surface
8
biochar
7
cuii
5
samples
5

Similar Publications

Stay-green sorghum varieties are known for their drought resistance and ability to retain green biomass during grain filling, making them crucial for sustainable agriculture in arid regions. However, there is limited information on their stover yield (SY) and nutritional quality when both grain and forage are harvested. This study assessed five stay-green sorghum varieties at the Bako Agricultural Research Centre using a randomized complete block design with three replications in 2020, 2021, and 2022.

View Article and Find Full Text PDF

Biomass, as a source of lignocellulose, can be valorized into carbon micro/nanofibers for adsorbing greenhouse gas (GHGs) emissions, especially CO. This article is derived from systematic evidence evaluation of published studies, presenting new, innovative, and systemic approaches to lignocellulose-based carbon micro/nanofiber studies. The review covers a general overview of carbon micro/nanofiber studies, mapping chronicles of the studies, carbon micro/nanofiber types for CO uptake, carbon micro/nanofibers fabrication and characterization, obtained carbonaceous material activation and performances, regulatory frameworks, and sustainability.

View Article and Find Full Text PDF

In the current work, three adsorbent materials were developed: biochar derived from date palm fiber (C), date palm fiber biochar/chitosan nanoparticles (CCS), and biochar/chitosan nanoparticle composite supplemented with glutamine (CCSG). These compounds were used as solid adsorbents to remove As from polluted water. Several characterization approaches were used to investigate all the synthesized solid adsorbents, including thermogravimetric analysis, N adsorption/desorption isotherm, scanning electron microscopy, transmission electron microscopy (TEM), attenuated total reflectance with Fourier transform infrared, and zeta potential.

View Article and Find Full Text PDF

Biomass, though a major energy source, remains underutilized. Biochar from biomass pyrolysis, with its high porosity and surface area, is especially useful as catalyst support, enhancing catalytic activity and reducing electron recombination in photocatalysis. Indonesia, the world's top palm oil producer, generated around 12 million tons of empty fruit bunches (EFBs) in 2023, making EFBs a promising biochar source.

View Article and Find Full Text PDF

Sulfur-enhanced microbiologically activated biochar and processed grass fibers were tested for suitability as bulk material for horticultural substrates. The potential for use as bulk material was improved when grass fibers with lower biological stability were acidified with elemental sulfur (S). Acidification of the fibers with S was obtained within 2 weeks and resulted in a higher biological stability due to improved decomposition during incubation with S, a change in the microbiome, or inhibition due to high sulfate concentrations, which reduced the decomposition activity.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!