Background/purpose: The purpose of this study was to evaluate the marginal gaps of dental restorations manufactured using conventional loss wax and casting, computer-aided design/computer-aided manufacturing (CAD/CAM), and 3D printing methods.
Materials And Methods: A zirconia master die model with an upper right first molar resin crown was prepared as a standardized model. A total of 30 resin master die models were duplicated from this standard model. Simultaneously, 10 Co-Cr-Mo metal crowns were individually obtained using the conventional loss wax and casting method (Group A), selective laser sintering (Group B), and CAD/CAM (Group C), respectively. The marginal gaps between the crowns fabricated conventional and digital methods with master die models were calculated using a 3D replica and mapping technique.
Results: Statistical analyses revealed there were significant differences in the marginal gaps in the group A with group B and C (p < 0.05). The mean marginal gaps between dental crowns with die models were 76 ± 61 μm, 116 ± 92 μm, and 121 ± 98 μm for groups A, B, and C, respectively.
Conclusion: Within the limitations of this study, the marginal gaps were clinical acceptable in conventional and digital techniques.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6742603 | PMC |
| http://dx.doi.org/10.1016/j.jds.2018.11.006 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Evaluation of microtensile bond strength and marginal adaptation of fiber-reinforced composites.
J Conserv Dent Endod
November 2024
Department of Conservative Dentistry and Endodontics, GITAM Dental College and Hospital, Visakhapatnam, Andhra Pradesh, India.
Background: Long-term durability of a restoration relies on the marginal integrity and its ability to withstand the occlusal forces. Fiber-reinforced composites (FRCs) exhibited superior properties in terms of fracture toughness, flexural strength, and wear resistance.
Aim: The aim of this study was to assess and compare marginal adaptation and microtensile bond strength (µTBS) of posterior FRCs comparing with a condensable composite.
Introduction: Anal Lymphoma (AL) is a rare presentation of extranodal lymphomas, characterized by occurrence in the anal area and largely understudied due to its infrequency. This study aims to address gaps in knowledge about AL's demographic and clinical profiles, treatments, and survival outcomes, leveraging data from the SEER program.
Methods: We conducted a retrospective analysis of 79 AL cases identified in the SEER database from 2000 to 2022; 36 stage I AL were identified and defined as localized primary anal lymphoma (L-PAL).
Comparative Effectiveness of Buprenorphine Adherence with Telemedicine versus In-person for Rural and Urban Patients.
J Am Pharm Assoc (2003)
December 2024
Vanderbilt University Medical Center, Department of Biomedical Informatics.
Background: Policy changes during the COVID-19 pandemic allowed buprenorphine to be prescribed for opioid use disorder (OUD) via telemedicine without an in-person visit. A recently proposed change will limit buprenorphine access to 30 days without an in-person visit. Given that people living in rural areas may be disproportionally impacted by this change, we sought to better understand how buprenorphine adherence may be impacted by requiring in-person visits.
View Article and Find Full Text PDFComparative analysis of the fit quality of monolithic zirconia veneers produced through traditional and digital workflows using silicone replica technique: an in vitro study.
BMC Oral Health
December 2024
Faculty of Odonto-Stomatology, University of Health Sciences, Vietnam National University Ho Chi Minh City, Ho Chi Minh City, Vietnam.
Background: The success of a restoration largely depends on the quality of its fit. This study aimed to investigate the fit quality of monolithic zirconia veneers (MZVs) produced through traditional and digital workflows.
Methods: A typodont maxillary right central incisor was prepared.
A Comparison of Internal, Marginal, and Incisal Gaps in Zirconia Laminates Fabricated Using Subtractive Manufacturing and 3D Printing Methods.
Biomimetics (Basel)
November 2024
Department of Dental Laboratory Science, College of Health Science, Catholic University of Pusan, 57 Oryundae-ro, Geumjeong-gu, Busan 46252, Republic of Korea.
DLP printing is a new method for producing zirconia laminates that ensure clinically acceptable gaps in the internal, marginal, and incisal regions. A typical model of a central maxillary incisor was prepped by a dentist and scanned. The laminate was designed using CAD software version 2023.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!