Thermal Conductivity Reduction in a Silicon Thin Film with Nanocones.

ACS Appl Mater Interfaces

CREST, Japan Science and Technology Agency , Kawaguchi , Saitama 332-0012 , Japan.

Published: September 2019

Modern thermoelectric devices incline toward inexpensive, environmentally friendly, and CMOS-compatible materials, such as silicon. To improve the thermoelectric performance of silicon, researchers try to decrease its thermal conductivity using various nanostructuring methods. However, most of these methods have limited efficiency because they are costly and damaging for the internal structure of silicon. Here, we propose a cost-effective, large-area, and maskless nanofabrication method that creates external nanocones on the silicon surface while preserving its interior. Our experiments show that these nanocones reduce the thermal conductivity of thin silicon membranes by more than 40%. Using a modified Callaway-Holland model, we study how the thermal conductivity is affected by various phonon scattering processes in the 4-295 K temperature range. We conclude that the nanocones generate additional surface scattering, which causes the thermal conductivity reduction. The proposed nanocones and their simple fabrication method are promising for the planar thermoelectric devices based on silicon.

Download full-text PDF

Source
http://dx.doi.org/10.1021/acsami.9b08797DOI Listing

Publication Analysis

Top Keywords

thermal conductivity
20
conductivity reduction
8
thermoelectric devices
8
silicon
7
thermal
5
nanocones
5
reduction silicon
4
silicon thin
4
thin film
4
film nanocones
4

Similar Publications

In recent years, the construction industry has faced challenges related to rising material costs, labor shortages and environmental sustainability, resulting in an increased interest in modular construction cores composed of recycled materials, such as XPS, PUR, PLW and GFRP, from waste from the truck body industry. Two resins, PUR and polyester, were used to bond these recycled composites. Physical, chemical and mechanical analyses showed that the panels formed with PUR resin had superior workability due to the higher open time of the resin, 11.

View Article and Find Full Text PDF

In this paper, we investigated the efficient metal-free phosphorus-nitrogen (PN) catalyst and used the PN catalyst to degrade waste PU with two-component binary mixed alcohols as the alcohol solvent. We examined the effects of reaction temperature, time, and other factors on the hydroxyl value and viscosity of the degradation products; focused on the changing rules of the hydroxyl value, viscosity, and molecular weight of polyols recovered from degradation products with different dosages of the metal-free PN catalyst; and determined the optimal experimental conditions of reaction temperature 180 °C, reaction time 3 h, and PN dosage 0.08%.

View Article and Find Full Text PDF

The main purpose of this study is to prepare a melamine aniline formaldehyde foam, an MAF copolymer, with lower water sensitivity and non-flammability properties obtained by the condensation reaction of melamine, aniline, and formaldehyde. In addition, the preparation of MAFF composites with organoclay reinforcement was determined as a secondary target in order to obtain better mechanical strength, heat, and sound insulation properties. For the synthesis of foams, the microwave irradiation technique, which offers advantages such as faster reactions, high yields and purities, and reduced curing times, was used together with the heating technique and the effect of organoclay content on the structural and textural properties of foams and both heat insulation and mechanical stability was investigated.

View Article and Find Full Text PDF

GaN-on-Si high-electron-mobility transistors have emerged as the next generation of high-powered and cost-effective microwave devices; however, the limited thermal conductivity of the Si substrate prevents the realization of their potential. In this paper, a GaN-on-insulator (GNOI) structure is proposed to enhance the heat dissipation ability of a GaN-on-Si HEMT. Electrothermal simulation was carried out to analyze the thermal performance of the GNOI-on-Si HEMTs with different insulator dielectrics, including SiO, SiC, AlN, and diamond.

View Article and Find Full Text PDF

Aluminum nitride (AlN) with a wide band gap (approximately 6.2 eV) has attractive characteristics, including high thermal conductivity, a high dielectric constant, and good insulating properties, which are suitable for the field of resistive random access memory. AlN thin films were deposited on ITO substrate using the radio-frequency magnetron sputtering technique.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!