Carbon black nanospheres were turned to hollow carbon nanospheres (HCNs) and were used as the conductive additive in the cathodes of Li-ion batteries (LIBs). The results show that 10 wt % HCN added to the LIB cathodes, such as LiMnO, LiCoO, LiNiMnCoO, and LiFePO, can provide significantly higher specific capacity than those using spherical carbon black. For example, a specific capacity of the LiMnO/HCN/PVDF cathode at 80:10:10 wt % with a bulk electrical conductivity of 1.07 Ω cm is 125 mA h g at 0.1 C from 3.0 to 4.3 V versus Li/Li, which is 3.85-fold higher than that using Super P. The stability tested at 1 C remains over 95% after 800 charge/discharge cycles with 100% Coulombic efficiency. Replacing the present carbon black conductive additive with HCN in this work may be one of the best choices to increase the charge storage performance of LIBs rather than only focusing on the development of active cathode materials.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6641299 | PMC |
| http://dx.doi.org/10.1021/acsomega.7b00763 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Interfacial Adsorption Interactions of Dyes and Chitosan/Activated Carbon@Curcumin Derivatives in Single-Component and Binary Solutions.
Langmuir
January 2025
Hephaestus Laboratory, School of Chemistry, Faculty of Sciences, Democritus University of Thrace, GR-65404 Kavala, Greece.
The remediation of wastewaters contaminated with dyes (discharged mainly from industry) is very important for preserving environmental quality and human health. In this study, a new composite chitosan (CS)-based adsorbent combined with activated carbon (AC) and curcumin (Cur) (abbreviated hereafter as CS/AC@Cur) in three different ratios (12.5%, 25%, and 50%) was synthesized for the removal of anionic [reactive black 5 (RB5)] and cationic [methylene blue (MB)] dyes in single-component or binary systems.
View Article and Find Full Text PDFOptical properties and photobleaching of wildfire ashes aqueous extracts.
Environ Sci Process Impacts
January 2025
Department of Civil, Environmental and Architectural Engineering, University of Colorado at Boulder, Boulder, 80309, USA.
Wildfires can severely degrade soils and watersheds. Post-fire rain events can leach ashes and altered dissolved organic matter (DOM) into streams, impacting water quality and carbon biogeochemistry. The photochemical properties and persistence of DOM from wildfire ash leachates are not well understood.
View Article and Find Full Text PDFInsect farming: A bioeconomy-based opportunity to revalorize plastic wastes.
Environ Sci Ecotechnol
January 2025
Global Centre for Environmental Remediation (GCER), College of Engineering, Science and Environment, University of Newcastle, Callaghan, NSW, 2308, Australia.
Managing plastic waste is one of the greatest challenges humanity faces in the coming years. Current strategies-landfilling, incineration, and recycling-remain insufficient or pose significant environmental concerns, failing to address the growing volume of plastic residues discharged into the environment. Recently, increasing attention has focused on the potential of certain insect larvae species to chew, consume, and partially biodegrade synthetic polymers such as polystyrene and polyethylene, offering novel biotechnological opportunities for plastic waste management.
View Article and Find Full Text PDFMassive Carbon Black Inhalation.
J Community Hosp Intern Med Perspect
January 2025
Departments of Internal Medicine, Texas Tech University Health Sciences Center, Lubbock, TX, USA.
Carbon black is the general term for a powdery commercial form of carbon. It can cause adverse health effects after inhalation, ingestion, or dermal contact. Exposure to carbon black particles can have adverse effects on the respiratory system; this exposure usually occurs when people inhale contaminated air in the workplace.
View Article and Find Full Text PDFRecycling of Post-Consumer Waste Polystyrene Using Commercial Plastic Additives.
ACS Cent Sci
January 2025
Department of Chemistry, Princeton University, Princeton, New Jersey 08544, United States.
Photothermal conversion can promote plastic depolymerization (chemical recycling to a monomer) through light-to-heat conversion. The highly localized temperature gradient near the photothermal agent surface allows selective heating with spatial control not observed with bulk pyrolysis. However, identifying and incorporating practical photothermal agents into plastics for end-of-life depolymerization have not been realized.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!