Novel and Stable D-A-π-A Dyes for Efficient Solid-State Dye-Sensitized Solar Cells.

ACS Omega

Applied Physical Chemistry, Center of Molecular Devices, Department of Chemistry, School of Chemical Science and Engineering, Organic Chemistry, Center of Molecular Devices, Department of Chemistry, School of Chemical Science and Engineering, and Department of Fiber and Polymer Technology, Wallenberg Wood Science Center, School of Chemical Science and Engineering, KTH-Royal Institute of Technology, SE-10044 Stockholm, Sweden.

Published: May 2017

Two novel organic donor-acceptor-π-acceptor sensitizers, W7 and W8, have been applied in efficient solid-state dye-sensitized solar cells (ssDSSCs). Using 2,2',7,7'-tetrakis(,-di--methoxyphenyl-amine) 9,9'-spirobifluorene (Spiro-OMeTAD) as hole-transport material (HTM), an excellent power conversion efficiency of 6.9% was recorded for W7, together with an excellent photocurrent of 10.51 mA cm and a high open-circuit voltage of 880 mV under standard AM 1.5 G illumination (100 mW cm). The solid-state solar cells based on W8 showed an efficiency of 5.2%, with a good photocurrent of 9.55 mA cm and an open-circuit voltage of 870 mV. Compared to that of the well-known WS2 sensitizer, the results show that the performance of the ssDSSC devices can be significantly improved by introducing triphenylamine moiety into their structure. In addition, results of photoinduced absorption spectroscopy show efficient dye regeneration for W7- and W8-based devices. A higher hole conductivity of the W7/HTM and W8/HTM layers compared to that of the WS2/HTM layer was observed, indicating an efficient charge transfer at the interfaces. The results obtained offer insights into the design of reliable and highly efficient ssDSSCs for large-scale applications.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6640992PMC
http://dx.doi.org/10.1021/acsomega.7b00067DOI Listing

Publication Analysis

Top Keywords

solar cells
12
efficient solid-state
8
solid-state dye-sensitized
8
dye-sensitized solar
8
open-circuit voltage
8
efficient
5
novel stable
4
stable d-a-π-a
4
d-a-π-a dyes
4
dyes efficient
4

Similar Publications

High defect concentrations at the interfaces are the basis of charge extraction losses and instability in perovskite solar cells. Surface engineering with organic cations is a common practice to solve this issue. However, the full implications of the counteranions of these cations for device functioning are often neglected.

View Article and Find Full Text PDF

Introduction: The choroid plexus is located in the cerebral ventricles. It consists of a stromal core and a single layer of cuboidal epithelial cells that forms the blood-cerebrospinal barrier. The main function of the choroid plexus is to produce cerebrospinal fluid.

View Article and Find Full Text PDF

Mechanically Resilient and Highly Efficient Flexible Perovskite Solar Cells with Octylammonium Acetate for Surface Adhesion and Stress Relief.

ACS Nano

January 2025

State Key Laboratory of Wide-Bandgap Semiconductor Devices and Integrated Technology, Faculty of Integrated Circuit, Xidian University, 710071 Xi'an, China.

Flexible perovskite solar cells (FPSCs) have advanced significantly because of their excellent power-per-weight performance and affordable manufacturing costs. The unsatisfactory efficiency and mechanical stability of FPSCs are bottleneck challenges that limit their application. Here, we explore the use of octylammonium acetate (OAAc) with a long, intrinsic, flexible molecular chain on perovskite films for surface adhesion and mechanical releasing.

View Article and Find Full Text PDF

Realizing fast charging in high-specific-energy lithium metal batteries (LMBs) remains a significant challenge. Here, a oleophilic garnet suspension electrolyte design is reported, using inorganic solid electrolyte modified by low-surface-energy 1H,1H,2H,2H-perfluorooctyl trichlorosilane (PFOTS), to address the dilemma of fast charging and high specific energy in LMBs. With the oleophilic suspension electrolytes, the ionic conductivity of carbonate electrolyte is increased by ≈20%.

View Article and Find Full Text PDF

Tailored Colloidal Shapes in Precursor Solutions for Efficient Blade-Coated Perovskite Solar Modules.

Adv Mater

January 2025

Beijing National Laboratory for Molecular Science, CAS Key Laboratory of Green Printing, Institute of Chemistry, Chinese Academy of Sciences, Beijing, 100190, China.

Metal halide perovskite solar cells (PSCs) have emerged as one of the most promising candidates for next-generation photovoltaic technologies. However, perovskite films deposited by blade-coating usually exhibit inferior film morphology compared to those fabricated by spin-coating, which hinders the power conversion efficiency (PCE) and stability of the scalable perovskite solar modules (PSMs). Herein, ellipsoidal colloids are tailored in the perovskite precursor solution by incorporating perovskite colloids and polymer additives.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!