As an anode material for sodium-ion batteries (SIBs), hard carbon (HC) presents high specific capacity and favorable cycling performance. However, high cost and low initial Coulombic efficiency (ICE) of HC seriously limit its future commercialization for SIBs. A typical biowaste, mangosteen shell was selected as a precursor to prepare low-cost and high-performance HC via a facile one-step carbonization method, and the influence of different heat treatments on the morphologies, microstructures, and electrochemical performances was investigated systematically. The microstructure evolution studied using X-ray diffraction, Raman, Brunauer-Emmett-Teller, and high-resolution transmission electron microscopy, along with electrochemical measurements, reveals the optimal carbonization condition of the mangosteen shell: HC carbonized at 1500 °C for 2 h delivers the highest reversible capacity of ∼330 mA h g at a current density of 20 mA g, a capacity retention of ∼98% after 100 cycles, and an ICE of ∼83%. Additionally, the sodium-ion storage behavior of HC is deeply analyzed using galvanostatic intermittent titration and cyclic voltammetry technologies.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6641066 | PMC |
| http://dx.doi.org/10.1021/acsomega.7b00259 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Facile Design of Highly Stretchable and Conductive Crumpled Graphene/NiS Films for Multifunctional Applications.
Small Methods
January 2025
Fujian Provincial Key Laboratory of Functional Marine Sensing Materials, College of Material and Chemical Engineering, Minjiang University, Fuzhou, 350108, P. R. China.
The cost-effective and scalable synthesis and patterning of soft nanomaterial composites with improved electrical conductivity and mechanical stretchability remains challenging in wearable devices. This work reports a scalable, low-cost fabrication approach to directly create and pattern crumpled porous graphene/NiS nanocomposites with high mechanical stretchability and electrical conductivity through laser irradiation combined with electrodeposition and a pre-strain strategy. With modulated mechanical stretchability and electrical conductivity, the crumpled graphene/NiS nanocomposite can be readily patterned into target geometries for application in a standalone stretchable sensing platform.
View Article and Find Full Text PDFScreened Ni single-cluster catalyst supported on graphidyne for high-performance electrocatalytic NO reduction to NH: A computational study.
J Colloid Interface Sci
January 2025
Key Laboratory of Photonic and Electronic Bandgap Materials, Ministry of Education, School of Physics and Electronic Engineering, College of Chemistry and Chemical Engineering, Harbin Normal University, Harbin 150025, China. Electronic address:
Electrocatalytic NO reduction (NORR) to NH represents a promising approach for converting hazardous NO waste gases into high-value NH products under ambient conditions. However, exploring stable, low-cost, and highly efficient catalysts to enhance the NO-to-NH conversion process remains a significant challenge. Herein, through systematic computational studies based on density functional theory (DFT), we rationally designed transition metal triatomic cluster supported on graphdiyne (TM/GDY) as potential single-cluster catalysts for high-performance NORR.
View Article and Find Full Text PDFStrong, ductile, and hierarchical hetero-lamellar-structured alloys through microstructural inheritance and refinement.
Proc Natl Acad Sci U S A
January 2025
Department of Materials Science and Engineering, Hong Kong Institute for Advanced Study, City University of Hong Kong, Hong Kong, China.
The strength-ductility trade-off exists ubiquitously, especially in brittle intermetallic-containing multiple principal element alloys (MPEAs), where the intermetallic phases often induce premature failure leading to severe ductility reduction. Hierarchical heterogeneities represent a promising microstructural solution to achieve simultaneous strength-ductility enhancement. However, it remains fundamentally challenging to tailor hierarchical heterostructures using conventional methods, which often rely on costly and time-consuming processing.
View Article and Find Full Text PDFImproved Analysis for Intrinsic Properties of Triaxial Accelerometers to Reduce Calibration Uncertainty.
Micromachines (Basel)
December 2024
NIST, Gaithersburg, MD 20899, USA.
We describe a modification of a previously described measurement-analysis protocol to determine the intrinsic properties of triaxial accelerometers by using a measurement protocol based on angular stepwise rotation in the Earth's gravitational field. This study was conducted with MEMS triaxial accelerometers that were co-integrated in four consumer-grade wireless microsensors. The measurements were carried out on low-cost rotation tables in different laboratories in different countries to simulate the reproducibility environment encountered in inter-comparisons of calibration capabilities.
View Article and Find Full Text PDFMetal Transfer Behavior and Molten Pool Dynamics in Cold Metal Transfer Pulse Advanced Additive Manufacturing of 7075 Aluminum Alloy.
Micromachines (Basel)
December 2024
The Institute of Technological Sciences, Wuhan University, Wuhan 430072, China.
Wire arc additive manufacturing (WAAM) with a special arc mode of cold metal transfer pulse advanced (CMT-PADV) is an ideal additive manufacturing process for fabricating aerospace components, primarily high-strength aluminum alloys, offering advantages such as high deposition rates and low cost. However, the numerical simulation of the CMT-PADV WAAM process has not been researched until now. In this study, we first developed a three-dimensional fluid dynamics model for the CMT-PADV WAAM of 7075 aluminum alloy, aiming at analyzing the droplet transition and molten pool flow.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!