Organic field-effect transistors (OFETs) have acquired increasing attention because of their wide range of potential applications in electronics; nevertheless, high operating voltage and low carrier mobility are considered as major bottlenecks in their commercialization. In this work, we demonstrate low-voltage, flexible OFETs based on ultrathin single-crystal microribbons. Flexible OFETs fabricated with 2,7-dioctylbenzothieno[3,2-]benzothiophene (C8-BTBT) based solution-processed ultrathin single-crystal microribbon as the semiconductor layer and high- polymer, polysiloxane-poly(vinyl alcohol) composite as an insulator layer manifest a significantly low operating voltage of -4 V, and several devices showed a high mobility of >30 cm V s. Besides, the carrier mobility of the fabricated devices exhibits a slight degradation in static bending condition, which can be retained by 83.3% compared with its original value under a bending radius of 9 mm. As compared to the bulk C8-BTBT single-crystal-based OFET, which showed a large crack only after 50 dynamic bending cycles, our ultrathin single-crystal-based counterpart demonstrates a much better dynamic force stability. Moreover, under a 20 mm bending radius, the mobility of the device decreased by only 11.7% even after 500 bending cycles and no further decrease was observed until 1000 bending cycles. Our findings reveal that ultrathin C8-BTBT single-crystal-based flexible OFETs are promising candidates for various high-performance flexible electronic devices.

Download full-text PDF

Source
http://dx.doi.org/10.1021/acsami.9b13871DOI Listing

Publication Analysis

Top Keywords

ultrathin single-crystal
12
flexible ofets
12
bending cycles
12
high-performance flexible
8
organic field-effect
8
field-effect transistors
8
based ultrathin
8
single-crystal microribbons
8
operating voltage
8
carrier mobility
8

Similar Publications

Photodetectors based on lead halide perovskites often show excellent performance but poor stability. Herein, we demonstrate a photodetector based on MAPbBr single crystals passivated with an ultrathin layer of PbSO, which shows superior detectivity and on/off ratios compared to the control device due to the combined effect of lower surface traps, reduced recombination and low dark current. In addition, the device retained ∼56% of its initial * with an impressive on/off ratio of ∼801 after one year compared to ∼22% of * and an on/off ratio of ∼6 of the control device.

View Article and Find Full Text PDF

Ultrafast Carrier Diffusion in Perovskite Monocrystalline Films.

J Phys Chem Lett

December 2024

State Key Laboratory for Artificial Microstructure and Mesoscopic Physics, Department of Physics, Peking University, Beijing 100871, China.

Monocrystalline perovskite materials exhibit superior properties compared with polycrystalline perovskites, including lower defect density, minimal grain boundaries, and enhanced carrier mobility. Nevertheless, the preparation of large-area, high-quality single-crystal films, which could prove invaluable for photoelectronic applications, remains a significant challenge. The study of how their unique properties go beyond polycrystalline thin films is still missing.

View Article and Find Full Text PDF

5.5 GHz film bulk acoustic wave filters using thin film transfer process for WLAN applications.

Microsyst Nanoeng

November 2024

The Institute of Technological Sciences, Hubei Key Laboratory of Electronic Manufacturing and Packaging Integration, Wuhan University, 430072, Wuhan, China.

Article Synopsis
  • WLAN technology is increasingly popular for its convenience and requires efficient, stable, and responsive network performance.
  • Film bulk acoustic resonators (FBARs) are essential for creating high-performance filters, but traditional methods face challenges like poor material quality and complicated production.
  • This paper describes a novel approach to design and fabricate FBARs using AlScN film and thin film transfer processes, achieving a resonant frequency of 5.5 GHz and improved performance for WLAN applications.
View Article and Find Full Text PDF

Van der Waals epitaxial growth of single-crystal molecular film.

Natl Sci Rev

November 2024

State Key Laboratory of Materials Processing and Die & Mould Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China.

Epitaxy is the cornerstone of semiconductor technology, enabling the fabrication of single-crystal film. Recent advancements in van der Waals (vdW) epitaxy have opened new avenues for producing wafer-scale single-crystal 2D atomic crystals. However, when it comes to molecular crystals, the overall weak vdW force means that it is a significant challenge for small molecules to form a well-ordered structure during epitaxy.

View Article and Find Full Text PDF
Article Synopsis
  • Diamond's unique properties make it ideal for quantum and electronic tech, but its growth on other materials is limited, affecting technology integration.
  • The researchers developed a method to directly bond single-crystal diamond membranes to various materials, achieving minimal contamination and consistent quality.
  • Their ultra-thin diamond membranes show potential for high-performance quantum applications and compatibility with advanced microscopy techniques, paving the way for new hybrid systems in technology.
View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!