AI Article Synopsis
- A new nanomaterial called bismuth oxychloride nanoplates (BiOCl NPs) has been introduced as a more cost-effective and environmentally friendly alternative to the standard hole transporting layers (HTLs) used in organic solar cells (OSCs).
- BiOCl NPs can be easily synthesized at a significantly lower cost compared to the commercial option (PEDOT:PSS) and do not require high-temperature post-treatment, simplifying the manufacturing process.
- Testing showed that OSCs using BiOCl HTLs achieved higher power conversion efficiencies and better stability compared to those with PEDOT:PSS, thanks to improved oxygen vacancies and interfacial contact.
Article Abstract
A novel nanomaterial, bismuth oxychloride nanoplates (BiOCl NPs), was first applied in organic solar cells (OSCs) as hole transporting layers (HTLs). It is worth noting that the BiOCl NPs can be facilely synthesized at ∼1/200 of the cost of the commercial PEDOT:PSS and well dissolved in green solvents. Different from the PEDOT:PSS interlayer, the deposition of BiOCl HTL is free of post-treatment at elevated temperature, which reduces device fabrication complexity. To demonstrate the universality of BiOCl in improving photovoltaic performance, OSCs containing various representative active layers were investigated. The power conversion efficiencies (PCEs) of the P3HT:PCBM, PTB7-Th:PCBM, and PM6:Y6-based OSCs with the BiOCl HTL boosted from 3.62, 8.78, and 15.63 to 4.24, 9.92, and 16.11%, respectively, compared to the PEDOT:PSS-based ones. It was found that the superior performances of the BiOCl-based OSCs are mainly attributed to the sufficient oxygen vacancies and improved interfacial contact. Moreover, the BiOCl-based OSCs show a much better stability than the cells with the PEDOT:PSS interfacial layer.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/acsami.9b12583 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Optimizing Electronic and Photovoltaic Properties of D-π-A Organic Dyes for DSSCs Using Density Functional Theory.
J Fluoresc
January 2025
Department of Physics \ Collage of Sciences, University of Kufa, Najaf, Iraq.
This research utilizes density functional theory to investigate the ground and excited-state properties of a new series of organic dyes with D-π-A configurations (D1-D6) for their potential application in dye-sensitized solar cells. The study focuses on modifying these dyes using various functional groups as π-bridges to optimize their electronic properties and improve their efficiency as sensitizers in DSSCs. The frontier molecular orbitals (HOMO and LUMO) were analysed to evaluate electron transfer properties.
View Article and Find Full Text PDFAryl-Acetylene Layered Hybrid Perovskites in Photovoltaics.
Angew Chem Int Ed Engl
January 2025
University of Fribourg Faculty of Science: Universite de Fribourg Faculte de sciences et de medecine, Adolphe Merkle Institue, Chemin des Verdiers 4, 1700, Fribourg, SWITZERLAND.
Metal halide perovskites have shown exceptional potential in converting solar energy to electric power in photovoltaics, yet their application is hampered by limited operational stability. This stimulated the development of hybrid layered (two-dimensional, 2D) halide perovskites based on hydrophobic organic spacers, templating perovskite slabs, as a more stable alternative. However, conventional organic spacer cations are electronically insulating, resulting in charge confinement within the inorganic slabs, thus limiting their functionality.
View Article and Find Full Text PDFA Simple One-Pot Method for the Synthesis of BiFeO/BiFeO Heterojunction for High-Performance Photocatalytic Degradation Applications.
Int J Mol Sci
December 2024
Joint International Research Laboratory of Information Display and Visualization, School of Electronic Science and Engineering, Southeast University, Nanjing 210096, China.
This study presents a facile one-pot synthesis method to fabricate BiFeO-BiFeO-BiO heterojunction photocatalysts with controllable compositions and pure phases. Three different binary heterojunctions (BiFeO/BiFeO, BiFeO/BiO, and BiFeO/BiO) and a ternary BiFeO/BiFeO/BiO heterojunction were formed, all exhibiting significantly enhanced photocatalytic performance for the degradation of methylene blue (MB) and phenol under visible light irradiation, outperforming the individual compositions. Notably, the BiFeO/BiFeO heterojunction achieved the highest degradation efficiency (93.
View Article and Find Full Text PDFMultifunctional Organic Molecule for Defect Passivation of Perovskite for High-Performance Indoor Solar Cells.
Materials (Basel)
January 2025
Key Laboratory of Applied Surface and Colloid Chemistry, National Ministry of Education, Shaanxi Key Laboratory for Advanced Energy Devices, Shaanxi Engineering Laboratory for Advanced Energy Technology, School of Materials Science and Engineering, Shaanxi Normal University, Xi'an 710119, China.
Perovskite solar cells (PSCs) can utilize the residual photons from indoor light and continuously supplement the energy supply for low-power electron devices, thereby showing the great potential for sustainable energy ecosystems. However, the solution-processed perovskites suffer from serious defect stacking within crystal lattices, compromising the low-light efficiency and operational stability. In this study, we designed a multifunctional organometallic salt named sodium sulfanilate (4-ABS), containing both electron-donating amine and sulfonic acid groups to effectively passivate the positively-charged defects, like under-coordinated Pb ions and iodine vacancies.
View Article and Find Full Text PDFExploring the Impact of Structural Modifications of Phenothiazine-Based Novel Compounds for Organic Solar Cells: DFT Investigations.
Polymers (Basel)
January 2025
Research Laboratory of Asymmetric Synthesis and Molecular Engineering of Materials for Organic Electronic (LR18ES19), Department of Physics, Faculty of Sciences of Monastir, University of Monastir, Avenue of Environment, Monastir 5019, Tunisia.
This paper explores a novel group of D-π-A configurations that has been specifically created for organic solar cell applications. In these material compounds, the phenothiazine, the furan, and two derivatives of the thienyl-fused IC group act as the donor, the π-conjugated spacer, and the end-group acceptors, respectively. We assess the impact of substituents by introducing bromine atoms at two potential substitution sites on each end-group acceptor (EG1 and EG2).
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!