Due to their high water content and macroscopic connectivity, hydrogels made from the conducting polymer PEDOT:PSS are a promising platform from which to fabricate a wide range of porous conductive materials that are increasingly of interest in applications as varied as bioelectronics, regenerative medicine, and energy storage. Despite the promising properties of PEDOT:PSS-based porous materials, the ability to pattern PEDOT:PSS hydrogels is still required to enable their integration with multifunctional and multichannel electronic devices. In this work, a novel electrochemical gelation ("electrogelation") method is presented for rapidly patterning PEDOT:PSS hydrogels on any conductive template, including curved and 3D surfaces. High spatial resolution is achieved through use of a sacrificial metal layer to generate the hydrogel pattern, thereby enabling high-performance conducting hydrogels and aerogels with desirable material properties to be introduced into increasingly complex device architectures.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1002/adma.201902869 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
A Platform Integrating Biophysical and Biochemical Stimuli to Enhance Differentiation and Maturation of Cardiomyocyte Subtypes Derived from Human Induced Pluripotent Stem Cells.
J Cardiovasc Dev Dis
February 2025
Graduate School of Science and Engineering, Yamagata University, Yonezawa 992-8510, Japan.
To enhance the differentiation and maturation of cardiomyocytes derived from human induced pluripotent stem cells, we developed a bioreactor system that simultaneously imposes biophysical and biochemical stimuli on these committed cardiomyocytes. The cells were cultured within biohydrogels composed of the extracellular matrix extracted from goat ventricles and purchased rat-origin collagen, which were housed in the elastic PDMS culture chambers of the bioreactor. Elastic and flexible electrodes composed of PEDOT/PSS, latex, and graphene flakes were embedded in the hydrogels and chamber walls, allowing cyclic stretch and electrical pulses to be simultaneously and coordinately applied to the cultured cells.
View Article and Find Full Text PDFTough and Strain-Sensitive Organohydrogels Based on MXene and PEDOT/PSS and Their Effects on Mechanical Properties and Strain-Sensing Performance.
ACS Appl Mater Interfaces
March 2024
National & Local Joint Engineering Research Center for Textile Fiber Materials and Processing Technology, School of Materials Science & Engineering, Zhejiang Sci-Tech University, Hangzhou 310018, P. R. China.
Conductive hydrogels have shown promising application prospects in the field of flexible sensors, but they often suffer from poor mechanical properties, low sensitivity, and lack of frost resistance. Herein, we report a tough, highly sensitive, and antifreeze strain sensor assembled from a conductive organohydrogel composed of a dual-cross-linked polyacrylamide and poly(vinyl alcohol) (PVA) network, as well as MXene nanosheets as nanofillers and poly(3,4-ethylenedioxythiophene)-doped poly(styrenesulfonate) (PEDOT/PSS) as the main conducting component (PPMP-OH organohydrogel). The tensile strength and toughness of PPMP-OH had been greatly enhanced by MXene nanosheets due to the mechanical reinforcement of MXene nanosheets, as well as various strong noncovalent interactions formed in the organohydrogels.
View Article and Find Full Text PDFPatternable Gelatin Methacrylate/PEDOT/Polystyrene Sulfonate Microelectrode Coatings for Neuronal Recording.
ACS Biomater Sci Eng
September 2022
School of Pharmacy, Faculty of Medical and Health Sciences, The University of Auckland, Auckland 1023, New Zealand.
This manuscript addresses the need for new soft biomaterials that can be fabricated on the surface of microelectrodes to reduce the mechanical mismatch between biological tissues and electrodes and improve the performance at the neural interface. By electrochemical polymerization of poly(3,4-dioxythiophene) (PEDOT)/polystyrene sulfonate (PSS) through a gelatin methacrylate (GelMA) hydrogel, we demonstrate the synthesis of a conducting polymer hydrogel (CPH) to meet the performance criteria of bioelectrodes. The hybrid material can be photolithographically patterned and covalently attached to gold microelectrodes, forming an interpenetrating network, as confirmed by infrared spectroscopy.
View Article and Find Full Text PDFA General Protein Unfolding-Chemical Coupling Strategy for Pure Protein Hydrogels with Mechanically Strong and Multifunctional Properties.
Adv Sci (Weinh)
February 2022
Department of Chemical, Biomolecular, and Corrosion Engineering, The University of Akron, Akron, OH, 44325, USA.
Protein-based hydrogels have attracted great attention due to their excellent biocompatible properties, but often suffer from weak mechanical strength. Conventional strengthening strategies for protein-based hydrogels are to introduce nanoparticles or synthetic polymers for improving their mechanical strength, but often compromise their biocompatibility. Here, a new, general, protein unfolding-chemical coupling (PNC) strategy is developed to fabricate pure protein hydrogels without any additives to achieve both high mechanical strength and excellent cell biocompatibility.
View Article and Find Full Text PDFOptical electrodes are important tools for optogenetic research. Flexible optical electrodes represent a refinement over traditional fiber-based electrodes because they contact with target cells gently by reducing mechanical mismatch, thereby enhancing their long-term, stable signal acquisition capability. Until now, little attention has been paid to flexible intracortical optical electrodes.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!