Preparation and Comparison of Properties of Three Phase Change Energy Storage Materials with Hollow Fiber Membrane as the Supporting Carrier.

Herein, we have used a hollow fiber membrane as a support layer material to encapsulate paraffin in order to prepare a phase change energy storage material. The phase change energy storage materials with three different support layers were successfully prepared and various properties were systematically characterized. There are also few reports on the use of hollow fiber membranes as the support carrier for the preparation of phase change energy storage materials. The significance of this work is in exploring the use of hollow fiber membranes as a support layer to prepare phase change energy storage materials. In addition, the choice of support carriers for phase change energy storage materials was enriched. Both the hollow fiber membrane columnar hollow portion and the pore structure of the membrane wall could be used to encapsulate paraffin, which makes it more advantageous than the other support materials. The SEM characterization confirmed that paraffin was successfully encapsulated on the membrane wall and columnar hollow part of the membranes. The TGA results indicate that the introduction of the membrane as an encapsulation carrier delayed the decomposition of the composite phase change energy storage materials. The activation energy during the decomposition in the three different phase change energy storage materials was calculated by the decomposition kinetics. Among the three fiber membranes explored in this work, the polypropylene (PP) encapsulation membrane performed better than the other two encapsulation membranes in terms of encapsulation content of paraffin, porosity, latent heats, thermal stability, and activation energy.