Ionic liquids (ILs) are being widely used in many diverse areas of social interest, including catalysis, electrochemistry, etc. However, issues related to hygroscopicity of many ILs and the toxic and/or nonbiodegradable features of some of them limit their practical use. Developing materials capable of IL recovery from aqueous media and dehydration, thus allowing their recycling and subsequent reutilization, in a single and efficient process still poses a major challenge. Herein, electrically conductive aerogels composed of carbon nanofibers (CNFs) with remarkable superhydrophobic features are prepared. CNF-based 3D aerogels are prepared through a cryogenic process, so called ice-segregation-induced self-assembly (ISISA) consisting of the unidirectional immersion of an aqueous chitosan (CHI) solution also containing CNFs in suspension into a liquid nitrogen bath, and subsequent freeze-drying. The CNF-based 3D aerogels prove effective for absorption of ILs from aqueous biphasic systems and recovery with quite low water contents just through a single process of filtration. Moreover, the electrical conductivity of CNF-based 3D aerogels is particularly interesting to treat highly viscous ILs because the Joule effect allows not only shortening of the absorption process but also enhancement of the flux rate when operating in flow-through conditions.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1002/adma.201903418 | DOI Listing |
Int J Biol Macromol
January 2025
Department of Chemical Engineering, University of New Brunswick, Fredericton, New Brunswick E3B5A3, Canada.
The practical application of polyethylene glycol (PEG) phase change materials (PCMs) necessitates exceptional shape stability, rapid thermal responsiveness, and a substantial thermal storage capacity. The present study focuses on the fabrication of a highly robust cellulose nanofibril (CNF) based aerogel with an ordered structure, serving as a three-dimensional (3D) scaffold for PEG to effectively prevent any potential leakage. Additionally, hydroxyl and amino functional groups are introduced to functionalize boron nitride nanosheets (BNNS-g), which are incorporated into the aerogel to enhance its thermal conductivity.
View Article and Find Full Text PDFAdv Mater
December 2024
New Cornerstone Science Laboratory, Department of Chemistry, Institute of Biomimetic Materials & Chemistry, Anhui Engineering Laboratory of Biomimetic Materials, Division of Nanomaterials & Chemistry, Hefei National Research Center for Physical Sciences at the Microscale, University of Science and Technology of China, Hefei, 230026, China.
Under the guidance of the carbon peaking and carbon neutrality goals, the urgency for green ecological construction and the depletion of nonrenewable resources highlight the importance of the research and development of sustainable new materials. Cellulose nanofiber (CNF) is the most abundant natural nanoscale building block widely existing on Earth. CNF has unique intrinsic physical properties, such as low density, low coefficient of thermal expansion, high strength, and high modulus, which is an ideal candidate with outstanding potential for constructing sustainable materials.
View Article and Find Full Text PDFAdv Mater
October 2024
Centre for Future Materials, School of Agriculture and Environmental Science, University of Southern Queensland, Springfield, QLD, 4300, Australia.
ACS Appl Mater Interfaces
October 2024
Microcellular Plastics Manufacturing Laboratory, Department of Mechanical and Industrial Engineering, University of Toronto, Toronto, Ontario, Canada, M5S 3G8.
This study addresses the inherent fragility and fractal limitations of traditional silica aerogels by developing a bio-templated aerogel fiber. Integrating cellulose nanofibers (CNFs), thermoplastic polyurethane (TPU), and silica aerogel (SA) in a dimethyl sulfoxide (DMSO) dispersion, a gel-spinning technique was employed to create aerogel fibers with superior thermomechanical performance. CNF also provided excellent rheological modification for successful spinnability, fast gelation, and fiber formation.
View Article and Find Full Text PDFACS Omega
August 2024
Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industry and Food Engineering, Guangxi University, Nanning 530004, China.
Self-powered wearable electronic products have rapidly advanced in the fields of sensing and health monitoring, presenting greater challenges for triboelectric materials. The limited surface polarity and structural defects in wood fibers restrict their potential as substitutes for petroleum-based materials. This study used bagasse fiber as the raw material and explored various methods, including functionalizing cellulose nanofibrils (CNFs) with polydopamine (PDA), in situ embedding of silver particles, filtration, and freeze-drying.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!