Background: To compare the differences between the one-dimensional (1D) length, two-dimensional (2D) area, and three-dimensional (3D) volume occupying ratios, and to assess the difference between the central and peripheral types of ossification of the posterior longitudinal ligament (OPLL).
Methods: In total, 60 patients were included in this study, and 1D and 2D occupying ratios were obtained using Centricity PACS (GE Healthcare), while a 3D model was created using MIMICS (Materialise, Leuven, Belgium). Clinical symptoms were measured preoperatively by the modified Japanese Orthopedic Association (JOA) score, short-form health survey (SF-36), and neck disability index. The increased signal intensity (ISI) in T2-weighted MRI was divided into three groups: grade 0, none; grade1, limited to one disc level; or grade2, beyond one disc level. The axial view of spinal canal in CT was vertically divided into three equal parts. Then, the OPLL was categorized by central and peripheral type according to the location of most protruded tip.
Results: The 1D, 2D, and 3D occupying ratios had a significantly negative relationship with JOA score (r=-0.503; -0.506; -0.516, respectively). There was little difference in the JOA score between the central and peripheral types (17.15 17.12, P=0.785). The relationship with MR ISI, according to the central and peripheral type, showed no significant difference. In each multiple regression analysis, the 1D, 2D, and 3D occupying ratios were determined to have more influence on the JOA score (Beta: -0.364, -0.411, -0.462, respectively) than age, sex, most severe level, OPLL type, location type, and MR ISI.
Conclusions: There was no difference between 1D, 2D, and 3D occupying ratios in reflecting the JOA score in cervical OPLL. Also, it is sufficient to reflect the occupying ratio in the clinical outcome without distinguishing between central and peripheral type.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6629567 | PMC |
http://dx.doi.org/10.21037/qims.2019.05.26 | DOI Listing |
Ophthalmologie
December 2024
Klinik für Augenheilkunde, Universitätsklinik Münster, Domagkstraße 15, 48149, Münster, Deutschland.
Background: The number of female ophthalmologists has risen steadily in recent years. The aim of this study is to investigate the gender ratios, subspecialties, and academic degrees of ophthalmologists at German university hospitals. Additionally, the study analyzes the proportion of women in science programs such as the Clinician Scientist Program.
View Article and Find Full Text PDFSci Total Environ
December 2024
Inhalation toxicology laboratory, Department of Environmental and Biological Science, University of Eastern Finland, Yliopistonranta 1, P.O. Box 1627, FI-70211 Kuopio, Finland.
Particulate matter (PM) and contaminants attached to PM can increase the risk of respiratory diseases. However, the health risk assessment of chlorinated paraffins (CPs), an emerging pollutant occupying a high proportion of persistent organic pollutants (POPs) in PM, remains scarce. This study aimed to evaluate the association between PM-bound CPs and asthma, along with relative symptoms, in school-aged children and adolescents.
View Article and Find Full Text PDFChemosphere
December 2024
Department of Environmental Engineering, Graduate Faculty of Environment, University of Tehran, Tehran, Iran. Electronic address:
Invincible growth in waste production is the consequence of overpopulation, which should be addressed to reduce the occupied landfill surface needed for their disposal and to alleviate the leachate of extremely hazardous material into the soil and water bodies. In this study, copper (Cu) was extracted from fly ash of a municipal solid waste incinerator by an electro-chemical method, which was optimized to recover the highest amount of Cu, and then it was chelated with 4-aminobenzoic acid (AM) and terephthalic acid (TM) in an aqueous phase. The obtained composites were then heated to form a porous calcinated copper-carbon composite and utilized to adsorb the forever contaminant of PFOS from aqueous solutions.
View Article and Find Full Text PDFLab Chip
December 2024
Department of Biomedical Engineering, University of Connecticut, 260 Glenbrook Rd, Storrs, CT 06269 USA.
The gold standard of microfluidic fabrication techniques, SU-8 patterning, requires photolithography equipment and facilities and is not suitable for 3D microfluidics. A 3D printer is more convenient and may achieve high resolutions comparable to conventional photolithography, but only with select materials. Alternatively, 5-axis computer numerical control (CNC) micro-milling machines can efficiently prototype structures with high resolutions, high aspect ratios, and non-planar geometries from a variety of materials.
View Article and Find Full Text PDFExp Dermatol
December 2024
Department of Dermatology, University of California at San Francisco, San Francisco, California, USA.
Regulatory T cells (Tregs) are specialised T lymphocytes that sit at the nexus of immune regulation and tissue repair. While it is appreciated that a substantial number of Tregs are present in healthy human skin, less is known about their microanatomic spatial localisation. Knowledge about the specialised niches that Tregs occupy may aid in rational drug development to treat dermatologic diseases.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!