Buoyancy material is a type of low-density and high-strength composite material which can provide sufficient buoyancy with deep submersibles. A new buoyancy material with N,N,N',N'-tetraepoxypropyl-4,4'-diaminodiphenylmethane epoxy resin (AG-80) and m-xylylenediamine (m-XDA) curing agent as matrix and hollow glass microsphere (HGM) as the filler is prepared. The temperature and time of the curing process were determined by the calculations of thermal analysis kinetics (TAK) through differential scanning calorimetry (DSC) analysis. The results show that the better mass ratio of AG-80 with m-XDA is 100/26. Combined TAK calculations and experimental results lead to the following curing process: pre-curing at 75 °C for 2 h, curing at 90 °C for 2 h, and post-curing at 100 °C for 2 h. The bulk density, compressive strength, and saturated water absorption of AG-80 epoxy resin-based buoyancy material were 0.729 g/cm, 108.78 MPa, and 1.23%, respectively. Moreover, this type of buoyancy material can resist the temperature of 250 °C.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6680907 | PMC |
| http://dx.doi.org/10.3390/polym11071137 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Effect of Growth Mindset on Mathematics Achievement Among Chinese Junior High School Students: The Mediating Roles of Academic Buoyancy and Adaptability.
Behav Sci (Basel)
November 2024
School of Mathematical Sciences, East China Normal University, Shanghai 200241, China.
A growth mindset is crucial for students' academic development. Many studies have demonstrated the influence of a growth mindset on mathematics achievement, but the mediating mechanisms underlying this relationship still warrant further exploration. This study investigates the mediating roles of students' academic buoyancy and adaptability in the relationship between the student growth mindset and mathematics achievement within the Chinese cultural context.
View Article and Find Full Text PDFA novel floating adsorbent for cesium based on Shirasu balloon modified with magnetite and Prussian blue.
Environ Sci Pollut Res Int
December 2024
Faculty of Environmental Earth Science, Hokkaido University, Kita 10 Nishi 5, Sapporo, 060-0810, Japan.
Shirasu balloon (SB) is a hollow glassy sphere produced from volcanic deposits by heating that can float up on water owing to its hollow structure. In this study, a novel adsorbent for the removal of cesium ion in water was developed by the modification of the surface of the SBs with magnetite (Mag) and Prussian blue (PB). The developed adsorbent (PB-Mag-SB) was characterized by elemental analysis, X-ray diffraction, and Fourier transform infrared spectrometry and the magnetism of the adsorbent.
View Article and Find Full Text PDFChemomechanical Self-Oscillatory Microgel Motility in Stratified Chemical Media.
Adv Mater
December 2024
Dynamic Colloidal Systems Laboratory, Department of Chemistry, Indian Institute of Technology, Roorkee, 247667, India.
The design of chemomechanical self-oscillators, which execute oscillations in the presence of constant stimuli lacking periodicity, is a step toward the development of autonomous and interactive soft robotic systems. This work presents a simple design of prolonged chemomechanical oscillatory movement in a microgel system capable of buoyant motility within stratified chemical media containing spatially localized sinking and floating stimuli. Three design elements are developed: a stimuli-responsive membranized calcium alginate microgel, a Percoll density gradient for providing stratified antagonistic chemical media, and transduction of microgel particle size actuation into buoyant motility via membrane-mediated displacement of the Percoll media.
View Article and Find Full Text PDFSeparated reactant mix width across diffusion-dominated and hydrodynamically dominated interface mix in inertial confinement fusion implosions.
Phys Rev E
November 2024
Laboratory for Laser Energetics, University of Rochester, Rochester, New York 14623, USA.
Diffusion-dominated mix in inertial confinement fusion (ICF) is characterized where the majority of the mix occurs in the immediate fuel-shell interface while hydrodynamic-dominated mix pulls shell material from farther away into the central fuel. A thin (150 nm) separated reactants ICF mix platform is highly sensitive to the amount of mix from the first micron of shell-fuel interface. This fine-spatial resolution platform has revealed that material mix in moderate convergence (CR∼12) ICF implosions is dominated by a diffusion mechanism.
View Article and Find Full Text PDFQuantifying the Volume of Residual Air in Commercial Intravenous Fluids and Assessing the Stability of Airless Intravenous Fluid Containers.
Mil Med
December 2024
Clinical and Operational Space Medicine Innovation Consortium (COSMIC), 59th Medical Wing, Lackland Air Force Base, TX 78236, USA.
Introduction: Commercial off-the-shelf (COTS) intravenous fluid (IVF) containers contain residual air, introducing the risk of venous air embolism (VAE). Venous air embolism occurs when air displaces blood flow in vasculature. The danger from residual air is often negligible in terrestrial settings, where gravitational forces generate buoyancy, pushing residual air to the top of the IVF container.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!