We fabricate a time-multiplexed stereoscopic display, which is composed of a quantum dot-polymer (QDP) scanning backlight, 120 Hz liquid crystal display (LCD), and shutter glasses. Blue LEDs, which can excite QDP film to produce white light, are adopted to replace the traditional white LEDs. The QDP scanning backlight, LCD, and shutter glasses can be controlled by the synchronization signal and work together, enabling viewers to obtain parallax views. Crosstalk is about 1%, and luminance through the shutter glasses is higher than 150 nit. The color gamut can be widely extended to 77.98% rather than the traditional 55.75% in the ITU-R Recommendation BT.2020 (Rec.2020) color space, due to the excellent properties of QD material.

Download full-text PDF

Source
http://dx.doi.org/10.1364/AO.58.004526DOI Listing

Publication Analysis

Top Keywords

scanning backlight
12
shutter glasses
12
time-multiplexed stereoscopic
8
stereoscopic display
8
quantum dot-polymer
8
qdp scanning
8
lcd shutter
8
display quantum
4
dot-polymer scanning
4
backlight fabricate
4

Similar Publications

This in vitro study evaluated the bacterial reduction provided by the EndoActivator (EA), Easy Clean (EC), passive ultrasonic irrigation (PUI), and XP-Endo Finisher. Eight-four mesial roots of mandibular first molars were instrumented, inoculated with Enterococcus faecalis, and divided into four groups (n. 20).

View Article and Find Full Text PDF

Upgraded technology has realized miniaturization and promoted transformation in each field. Miniaturized light-emitting diode (LED) chips enable higher resolution and create a full sense of immersion in displays. Porous GaN is a structure that can reduce excitation light leakage and enhance the light conversion efficiency.

View Article and Find Full Text PDF

UV Sensor Based on Surface Acoustic Waves in ZnO/Fused Silica.

Sensors (Basel)

April 2023

Department of Information Engineering, Electronics and Telecommunications, Sapienza University of Rome, Via Eudossiana 18, 00184 Rome, Italy.

Zinc oxide (ZnO) thin films have been grown by radio frequency sputtering technique on fused silica substrates. Optical and morphological characteristics of as-grown ZnO samples were measured by various techniques; an X-ray diffraction spectrum showed that the films exhibited hexagonal wurtzite structure and were c-axis-oriented normal to the substrate surface. Scanning electron microscopy images showed the dense columnar structure of the ZnO layers, and light absorption measurements allowed us to estimate the penetration depth of the optical radiation in the 200 to 480 nm wavelength range and the ZnO band-gap.

View Article and Find Full Text PDF

This paper presents a maskless lithography system that can perform three-dimensional (3D) ultraviolet (UV) patterning on a photoresist (PR) layer. After PR developing processes, patterned 3D PR microstructures over a large area are obtained. This maskless lithography system utilizes an UV light source, a digital micromirror device (DMD), and an image projection lens to project a digital UV image on the PR layer.

View Article and Find Full Text PDF

Investigation of Autostereoscopic Displays Based on Various Display Technologies.

Nanomaterials (Basel)

January 2022

Department of Electrical and Electronic Engineering, Southern University of Science and Technology, Shenzhen 518055, China.

The autostereoscopic display is a promising way towards three-dimensional-display technology since it allows humans to perceive stereoscopic images with naked eyes. However, it faces great challenges from low resolution, narrow viewing angle, ghost images, eye strain, and fatigue. Nowadays, the prevalent liquid crystal display (LCD), the organic light-emitting diode (OLED), and the emerging micro light-emitting diode (Micro-LED) offer more powerful tools to tackle these challenges.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!