Thermally Modified Iron-Inserted Calcium Phosphate for Magnetic Hyperthermia in an Acceptable Alternating Magnetic Field.

Magnetic hyperthermia treatment using calcium phosphate nanoparticles is an evolutionary choice because of its excellent biocompatibility. In the present work, Fe is incorporated into HAp nanoparticles by thermal treatment at various temperatures. Induction heating was examined within the threshold H f value of 4.58 × 10 kA m s (H is the strength of alternating magnetic field and f is the operating frequency) and sample concentration of 10 mg/mL. The temperature-dependent structural modifications are well correlated with the morphological, surface charge, and magnetic properties. Surface charge changes from +10 mV to -11 mV upon sintering because of the diffusion of iron in the HAp lattice. The saturation magnetization has been achieved by sintering the nanoparticles at 400 and 600 °C, which has led to the specific absorption rate of 12.2 and 37.2 W/g, respectively. Achievement of the hyperthermia temperature (42 °C) within 4 min is significant when compared with the existing magnetic calcium phosphate nanoparticles. The systematic investigation reveals that the HAp nanoparticles partially stabilized with FeOOH and biocompatible α-FeO exhibit excellent induction heating. In vitro tests confirmed the samples are highly hemocompatible. The importance of the present work lies in HAp nanoparticles exhibiting induction heating without compromising the factors such as H f value, low sample concentration, and reduced duration of applied field.