Integration of Both Invariable and Tunable Microwave Magnetisms in a Single Flexible LaSrMnO Thin Film.

ACS Appl Mater Interfaces

College of Physics Science & Information Engineering and Key Laboratory of Advanced Films of Hebei Province , Hebei Normal University, Shijiazhuang 050024 , China.

Published: June 2019

High-quality flexible magnetic oxide thin films have promoted a wide range of potential applications in spintronic devices due to their unique physical properties. To obtain the optimized microwave magnetism for future all-oxide-based spintronic applications, high-quality oxide materials with excellent epitaxial quality as well as specific bending properties related to ferromagnetic resonance are high in demand. Here, (001)-oriented LaSrMnO epitaxial thin films with different thicknesses have been grown and subsequently transferred onto flexible poly(dimethylsiloxane) substrates. The microwave magnetisms of these film samples have been investigated under various bending states. Under bending, the ferromagnetic resonance lineshape of the film gradually transits from a single mode to a superposition of multimodes, possibly because of the uneven distribution of magnetization in the bending film at X-band. This phenomenon is more apparent when the direction of the applied magnetic field goes close to the out-of-plane of the film. Hence, an integration of invariable and continuous tuning of ferromagnetic resonance field under various mechanical bending can be achieved in one same sample by just tuning the direction of the applied magnetic field, which reveals that the flexible LaSrMnO thin films have huge potential in the applications in future flexible multifunctional devices.

Download full-text PDF

Source
http://dx.doi.org/10.1021/acsami.9b04877DOI Listing

Publication Analysis

Top Keywords

thin films
12
ferromagnetic resonance
12
integration invariable
8
microwave magnetisms
8
flexible lasrmno
8
lasrmno thin
8
potential applications
8
direction applied
8
applied magnetic
8
magnetic field
8

Similar Publications

Hypothesis: Bubbles oscillating near a free surface are common across numerous systems. Thin liquid films (TLFs) formed between an oscillating bubble and a free surface can exhibit distinct morphological features influenced by interfacial properties, evaporation, and deformation history. We hypothesize that a continuous film presence throughout oscillation results in a wimple morphology, whereas intermittent film presence leads to a dimple formation.

View Article and Find Full Text PDF

High Performance of Cs2AgBiBr6 Perovskite-based Photodetectors by Adding DEAC.

Chemistry

December 2024

East China University of Science and Technology, School of Materials Science and Engineering, meilong Road, 200237, shanghai, CHINA.

Perovskite-based photodetectors (PDs) are broadly utilized in optical communication, non-destructive testing, and smart wearable devices due to their ability to convert light into electrical signals. However, toxicity and instability hold back their mass production and commercialization. The lead-free Cs2AgBiBr6 double perovskite film, promised to be an alternative, is fabricated by electrophoretic deposition (EPD), which compromises film quality.

View Article and Find Full Text PDF

High photothermal conversion efficiency of RF sputtered TiO Magneli phase thin films and its linear correlation with light absorption capacity.

Sci Rep

December 2024

Centre Énergie, Matériaux Télécommunications, Institut National de la Recherche Scientifique, 1650, Blvd, Lionel-Boulet, Varennes, QC, J3X-1P7, Canada.

RF-sputtering is used to deposit TiO-Magneli-phase films onto various substrates at deposition temperatures (T) ranging from 25 to 650 °C. Not only the structural, but also electrical conductivity, optical absorbance and photothermal properties of the TiO films are shown to change significantly with T. A T of 500 °C is pointed out as the optimal temperature that yields highly-crystalized pure-TiO-Magneli phase with a densely-packed morphology and a conductivity as high as 740 S/cm.

View Article and Find Full Text PDF

Due to their outstanding electrical and thermal properties, graphene and related materials have been proposed as ideal candidates for the development of lightweight systems for thermoelectric applications. Recently, the nanolaminate architecture that entails alternation of continuous graphene monolayers and ultrathin polymer films has been proposed as an efficient route for the development of composites with impressive physicochemical properties. In this work, we present a novel layer-by-layer approach for the fabrication of highly ordered, flexible, heat-resistant, and electrically conductive freestanding graphene/polymer nanolaminates through alternating Marangoni-driven self-assembly of reduced graphene oxide (rGO) and poly(ether imide) (PEI) films.

View Article and Find Full Text PDF

Robust and ultra-thin nanocellulose/MXene composite film and its performance in efficient electricity-generation and sensing.

Int J Biol Macromol

December 2024

Department of Plastic and Cosmetic Surgery, Treatment Center of Burn and Trauma, Affiliated Hospital of Jiangnan University, Wuxi 214122, China. Electronic address:

The conversion of mechanical energy into electrical energy by triboelectric nanogenerators (TENG) has attracted attention in recent years, particularly in the field of wearable sensor. In this work, TEMPO-oxidized cellulose nanofibers (TOCNF) with carboxylate groups were compounded with MXene to serve as both the negative friction layer and the electrode in assembling a TENG with nylon. The synergistic effect between TOCNF and MXene was analyzed to disclose its influence on the performance of the as-prepared TENG.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!