Ultrathin silver nanowires (UTAgNWs) are indispensable to achieve transparent conductive films (TCFs) with overall optoelectronic performance exceeding that of the state-of-the-art indium tin oxide films. Impurities in raw UTAgNW products severely impair the optical properties of TCFs. Unfortunately, highly effective and environment-friendly approaches for purification of UTAgNWs are still lacking. Herein, we report the purification of UTAgNWs using deionized water along with a small amount of surfactants as the purifying agent. TCFs coated with the purified UTAgNWs exhibit a light transmittance of 97.9% and a haze of 1.22% at a sheet resistance of 36.3 Ω sq or a light transmittance of 99.8% and a haze of 0.47% at a sheet resistance of 187.3 Ω sq. Both the transmittance and the haze are among the best reported values for AgNW TCFs in the literature. The purification process does not involve any toxic or hazardous chemicals and is both scalable and cost-effective.

Download full-text PDF

Source
http://dx.doi.org/10.1021/acsami.9b04425DOI Listing

Publication Analysis

Top Keywords

ultrathin silver
8
silver nanowires
8
transparent conductive
8
conductive films
8
purification utagnws
8
light transmittance
8
sheet resistance
8
water-based purification
4
purification ultrathin
4
nanowires transparent
4

Similar Publications

The conductivity of AgNWs electrodes can be enhanced by incorporating Ag grids, thereby facilitating the development of large-area flexible organic solar cells (FOSCs). Ag grids from vacuum evaporation offer the advantages of simple film formation, adjustable thickness, and unique structure. However, the complex 3D multi-component structure of AgNWs electrodes will exacerbate the aggregation of large Ag particles, causing the device short circuits.

View Article and Find Full Text PDF

We propose and demonstrate a data-driven plasmonic metascreen that efficiently absorbs incident light over a wide spectral range in an ultra-thin silicon film. By embedding a double-nanoring silver array within a 20 nm ultrathin amorphous silicon (a-Si) layer, we achieve a significant enhancement of light absorption. This enhancement arises from the interaction between the resonant cavity modes and localized plasmonic modes, requiring precise tuning of plasmon resonances to match the absorption region of the silicon active layer.

View Article and Find Full Text PDF

Colloidal ZnAl-Layered Double Hydroxide Nanomaterials for Effective Prevention of SARS-CoV-2.

ACS Appl Bio Mater

January 2025

Department of Dermatology, Yueyang Hospital of Integrated Traditional Chinese and Western Medicine, Shanghai University of Traditional Chinese Medicine, Shanghai 200437, China.

SARS-CoV-2 is a threat to global public health, which requires the development of safe measures to reduce the spread of this coronavirus. Herein, in this study, we prepared and examined potential antiviral agents based on ZnAl-layered double hydroxide (ZnAl-LDH) materials. ZnAl-LDH-based samples were synthesized via a one-pot low-temperature coprecipitation method, which features an ultrathin structure.

View Article and Find Full Text PDF

Mechanically Stable and Damage Resistant Freestanding Ultrathin Silver Nanowire Films with Closely Packed Crossed-Lamellar Structure.

Precis Chem

December 2024

Department of Chemistry, New Cornerstone Science Laboratory, Institute of Biomimetic Materials & Chemistry, Anhui Engineering Laboratory of Biomimetic Materials, Division of Nanomaterials & Chemistry, Hefei National Research Center for Physical Sciences at the Microscale, University of Science and Technology of China, Hefei 230026, China.

One-dimensional (1D) functional nanowires are widely used as nanoscale building blocks for assembling advanced nanodevices due to their unique functionalities. However, previous research has mainly focused on nanowire functionality, while neglecting the structural stability and damage resistance of nanowire assemblies, which are critical for the long-term operation of nanodevices. Biomaterials achieve excellent mechanical stability and damage resistance through sophisticated structural design.

View Article and Find Full Text PDF

A small amount of silver was obliquely deposited onto a polymer subwavelength grating to form a metasurface that comprised silver split-tubes. An ultra-thin silver film with a monitor-controlled thickness of 20 nm at the corner of each ridge of the grating provided the most sensitive surface-enhanced Raman scattering (SERS) measurements. An excitation laser beam that was incident from the substrate provided similar or better SERS enhancement than did the general configuration with the laser beam incident directly on the surface of the nanostructure.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!