This study reports 6FDA:BPDA-DAM polyimide-derived hollow fiber carbon molecular-sieve (CMS) membranes for hydrogen and ethylene separation. Since H /C H selectivity is the lowest among H /(C -C ) hydrocarbons, an optimized CMS fiber for this gas pair is useful for removing hydrogen from all-cracked gas mixtures. A process we term hyperaging provides highly selective CMS fiber membranes by tuning CMS ultramicropores to favor H over larger molecules to give a H /C H selectivity of over 250. Hyperaging conditions and a hyperaging mechanism are discussed in terms of an expedited physical aging process, which is largely controlled by the hyperaging temperature. For the specific CMS material considered here, a hyperaging temperature beyond 90 °C but less than 250 °C works best. Hyperaging also stabilizes CMS materials against physical aging and stabilizes the performance of H separation over extended periods. This work opens a door in the development of CMS materials for the separation of small molecules from large molecules.

Download full-text PDF

Source
http://dx.doi.org/10.1002/anie.201904913DOI Listing

Publication Analysis

Top Keywords

carbon molecular-sieve
8
hollow fiber
8
cms fiber
8
physical aging
8
hyperaging temperature
8
cms materials
8
hyperaging
7
cms
7
hyperaging tuning
4
tuning carbon
4

Similar Publications

Tuning Fluorination of Carbon Molecular Sieve Membranes with Enhanced Reverse-Selective Hydrogen Separation From Helium.

Small

January 2025

State Key Laboratory of Fine Chemicals, Frontier Science Center for Smart Materials, School of Chemical Engineering, Dalian University of Technology, Liaoning, Dalian, 116024, China.

Membrane technology has been explored for separating helium from hydrogen in natural gas reservoirs, a process that remains extremely challenging due to the sub-Ångstrom size difference between H and He molecules. Reverse-selective H/He separation membranes offer multiple advantages over conventional helium-selective membranes, which, however, suffer from low H/He selectivity. To address this hurdle, a novel approach is proposed to tune the ultra-micropores of carbon molecular sieves (CMS) membranes through fluorination of the polymer precursor.

View Article and Find Full Text PDF

Atomically Fine-Tuning Organic-Inorganic Carbon Molecular Sieve Membranes for Hydrogen Production.

ACS Nano

January 2025

Department of Chemical and Biological Engineering, University at Buffalo, The State University of New York, Buffalo, New York 14260, United States.

Polymeric membranes with great processability are attractive for the H/CO separation required for hydrogen production from renewable biomass with carbon capture for utilization and sequestration. However, it remains elusive to engineer polymer architectures to obtain desired sub-3.3 Å ultramicropores to efficiently sieve H from CO.

View Article and Find Full Text PDF

To confront the energy consumption, high performance membrane materials are urgently needed. Carbon molecular sieve (CMS) membranes exhibit superior capability in separating gas mixtures efficiently. However, it remains a grand challenge to precisely tune the pore size and distribution of CMS membranes to further improve their molecular sieving properties.

View Article and Find Full Text PDF

The development of a novel multifunctional adsorbent for the sensitive detection and capture of antibiotic residues in environmental and food samples presents a significant challenge. In this study, we synthesized a pioneering nanocomposite, ILs@PC, by encapsulating task-specific ionic liquids (ILs) within nitrogen-doped porous carbon (PC) derived from metal-triazolate frameworks. This ILs@PC nanocomposite functions as a multifunctional adsorbent in dispersive solid-phase extraction (DSPE), enabling simultaneous sorptive removal, sensitive detection, and molecular sieve selection.

View Article and Find Full Text PDF

Ceria-Catalysed Production of Dimethyl Carbonate from Methanol and CO: Effect of Using a Dehydrating Agent Combined with a Solid Cocatalyst.

Molecules

November 2024

Univ. Lille, CNRS, Centrale Lille, Univ. Artois, UMR 8181-UCCS-Unité de Catalyse et Chimie du Solide, F-59000 Lille, France.

The direct synthesis of dimethyl carbonate (DMC) from CO and methanol over ceria-based catalysts, in the presence of a dehydrating agent shifting the thermodynamical equilibrium of the reaction, has received significant interest recently. In this work, several dehydrating agents, such as molecular sieves, 2,2-dimethoxypropane (DMP), dimethoxymethane (DMM) and 1,1,1-trimethoxymethane (TMM), are combined with commercial ceria to compare their influence on the DMC yield obtained under the same set of operating conditions. TMM is found to be the most efficient; however, its conversion is not complete even after 48 h of reaction.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!