Mn:CsPbCl nanocrystals (NCs) were synthesized using a modified one-pot injection method, which exhibits significantly improved thermal stability. For the first time, the pressure-treated optical and structural properties of synthetic Mn:CsPbCl NCs were further investigated, and their associated intriguing electrical and photoelectric properties were revealed from impedance spectra and photocurrent measurements under compression. The pressure-dependent photoluminescence experienced an initial redshift before 1.7 GPa followed by a continuous blueshift, as evidenced by the bandgap shifts. High-pressure XRD spectra uncovered a cubic-to-orthorhombic structural transition at about 1.1 GPa and subsequent amorphization upon further compression, which was fully reversible. Furthermore, the sample annealing from 340 K drove grain growth and decreased grain boundary resistance at ambient pressure. The compression further decreased the grain boundary barrier and improved the electrical conductivity (up to ∼10Ω cm) of the thermally annealed Mn:CsPbCl NC surface. Simultaneous photocurrent enhancement of thermally annealed NCs was also achieved as expected, and reached optimal performance at 0.7 GPa. Strikingly, after the pressure cycling (loading-releasing), the results show that thermally annealed Mn:CsPbCl NCs gained preservable higher electrical conductivity (∼10 times increase) and an improved photoelectric response compared to the ambient state before compression. This work proves that high pressure is useful for opening the versatility in the structure and properties of metal-halide perovskite nanocrystals leading to a promising way for superior optoelectronic materials-by-design.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1039/c9nr03045j | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Asymmetric self-organization from a symmetric film by phase separation.
Nanoscale
January 2025
Department of Materials Science and Engineering, Kyushu Institute of Technology, 1-1 Sensui-cho, Tobata-ku, Kitakyushu 804-8550, Japan.
Self-organization realizes various nanostructures to control material properties such as superconducting vortex pinning and thermal conductivity. However, the self-organization of nucleation and growth is constrained by the growth geometric symmetry. To realize highly controlled three-dimensional nanostructures by self-organization, nanostructure formation that breaks the growth geometric symmetry thermodynamically and kinetically, such as tilted or in-plane aligned nanostructures, is a challenging issue.
View Article and Find Full Text PDFHeat-Assisted Direct Photopatterning of Small-Molecule OLED Emitters at the Micrometer Scale.
Small Methods
January 2025
Department of Chemical and Biomolecular Engineering, Institute of Emergent Materials, Sogang University, Seoul, 04107, Republic of Korea.
A crucial step in fabricating full-color organic light-emitting diode (OLED) displays is patterning the emissive layer (EML). Traditional methods utilize thermal evaporation through metal masks. However, this limits the achievable resolution required for emerging microdisplay technologies.
View Article and Find Full Text PDFMicrostructure and Thermal Cyclic Behavior of FeNiCoAlTaB High-Entropy Alloy.
Materials (Basel)
January 2025
Department of Materials Science and Engineering, National Taiwan University, Taipei 10617, Taiwan.
This study investigates the grain morphology, microstructure, magnetic properties and shape memory properties of an FeNiCoAlTaB (at%) high-entropy alloy (HEA) cold-rolled to 98%. The EBSD results show that the texture intensities of the samples annealed at 1300 °C for 0.5 or 1 h are 2.
View Article and Find Full Text PDFBilayer TiO/Mo-BiVO Photoelectrocatalysts for Ibuprofen Degradation.
Materials (Basel)
January 2025
Section of Condensed Matter Physics, Department of Physics, National and Kapodistrian University of Athens, University Campus, 15784 Athens, Greece.
Heterojunction formation between BiVO nanomaterials and benchmark semiconductor photocatalysts has been keenly pursued as a promising approach to improve charge transport and charge separation via interfacial electron transfer for the photoelectrocatalytic degradation of recalcitrant pharmaceutical pollutants. In this work, a heterostructured TiO/Mo-BiVO bilayer photoanode was fabricated by the deposition of a mesoporous TiO overlayer using the benchmark P25 titania catalyst on top of Mo-doped BiVO inverse opal films as the supporting layer, which intrinsically absorbs visible light below 490 nm, while offering improved charge transport. A porous P25/Mo-BiVO bilayer structure was produced from the densification of the inverse opal underlayer after post-thermal annealing, which was evaluated on photocurrent generation in aqueous electrolyte and the photoelectrocatalytic degradation of the refractory anti-inflammatory drug ibuprofen under back-side illumination by visible and UV-Vis light.
View Article and Find Full Text PDFPreparation and Physical Properties of Quaternary MnFeSiAl Alloy Powders with Heusler and β-Mn Structures.
Materials (Basel)
January 2025
Institute of Materials Engineering, University of Silesia in Katowice, 75 Pułku Piechoty 1A, 41-500 Chorzów, Poland.
Manganese-based alloys with the composition MnFeZ (Z = Si, Al) have been extensively investigated in recent years due to their potential applications in spintronics. The MnFeSi alloy, prepared in the form of ingots, powders, or ribbons, exhibits either a cubic full-Heusler (2) structure, an inverse-Heusler (XA) structure, or a combination of both. In contrast, the MnFeAl alloy has so far been synthesized only in the form of ingots, featuring a primitive cubic (β-Mn type) structure.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!