We have carried out a detailed study of the morphological, structural, optical and magnetic properties of Cr doped TiO nanocrystals with doping concentrations varying from 3 to 12 atomic weight%. The results obtained from transmission electron microscopy analysis, size-strain plots of all the Cr-doped samples and crystallite size estimation reveal the particle size of the prepared nanocrystals to be well below 10 nm, which is observed to exhibit a decreasing trend with an increase in the Cr dopant concentration. All the samples crystallize in the anatase tetragonal phase of TiO, which is confirmed from the Rietveld refinement of the X-ray diffraction patterns and the different modes present in the Raman spectra. The E(1) mode shows a clear red shift and broadening with increase in the Cr concentration, which indicates the replacement of Ti ions with Cr ions in the TiO lattice. The possibility of the presence of different functional groups present is verified by Fourier transform infra-red spectroscopy. The presence of Cr and Ti is confirmed from the X-ray photoelectron spectroscopy (XPS) results suggesting the formation of oxygen vacancies to compensate for the charge neutrality. The XPS results validate the Cr existence in the Cr:TiO system and corroborate with a slight peak shift towards lower diffraction angle and further confirm the substitutional doping in the present case. Enhanced visible range optical absorption and a clear red shift associated with the absorption edge also suggest the incorporation of Cr ions into the host system. The estimated band-gap of Cr-doped TiO nanocrystals reveals a decreasing trend with increasing Cr concentration. The Urbach energy associated with all the Cr-doped samples signifies the presence of oxygen vacancy related defects in the present system, which is further verified using photoluminescence (PL) spectra, and the deconvolution of the PL spectra provides an insight into the oxygen vacancy defects associated with the system. Paramagnetic (PM) behaviour is observed with an increase in the PM moment, suggesting the increase in isolated Cr ions with increase in the Cr concentration, which is further explained using a bound magnetic polaron (BMP) model. Isolated BMP formation could be the reason for the observed PM behavior of the present system, where the trapping of 3d electrons associated with Cr in the vacancy sites could ultimately lead to fewer overlapped BMPs, yielding a net PM moment. The present Cr:TiO system could be modified with tailored optical and magnetic properties for functional applications such as magneto-optics and optoelectronic devices.

Download full-text PDF

Source
http://dx.doi.org/10.1039/c9cp01351bDOI Listing

Publication Analysis

Top Keywords

tio nanocrystals
12
visible range
8
range optical
8
optical absorption
8
urbach energy
8
cr-doped tio
8
optical magnetic
8
magnetic properties
8
cr-doped samples
8
decreasing trend
8

Similar Publications

Abiotic stresses, notably cold stress, significantly influence various aspects of plant development and reproduction. Various approaches have been proposed to counteract the adverse impacts of cold stress on plant productivity. The unique properties of nanoparticles contribute to an enhanced tolerance of plants to challenging conditions.

View Article and Find Full Text PDF

Enhanced bone cement for fixation of prosthetic joint utilizing nanoparticles.

J Mater Sci Mater Med

January 2025

Biomedical Engineering Department, Faculty of Engineering, Helwan University, Cairo, Egypt.

Bone cement is commonly utilized to secure prosthetic joints in the body because of its robust fixation, stability, biocompatibility, and immediate load-bearing capability. However, issues such as loosening, leakage, and insufficient bioactivity can lead to its failure. Therefore, improving its mechanical, physical, and biological properties is crucial for enhancing its efficiency.

View Article and Find Full Text PDF

Polymer-based nanocomposite coatings that are enhanced with nanoparticles have gained recognition as effective materials for antibacterial purposes, providing improved durability and biocidal effectiveness. This research introduces an innovative chitosan-based polymer nanocomposite, enhanced with titanium oxide nanopowders and carbon quantum dots. The material was synthesized via the sol-gel process and applied to 316L stainless steel through dip-coating.

View Article and Find Full Text PDF

Synthesis, characterization and antimicrobial application of carrageenan/TiO composite materials.

Int J Biol Macromol

January 2025

Department of Chemistry, College of Natural and Mathematical Sciences, The University of Dodoma, P.O Box 259, Dodoma, Tanzania. Electronic address:

In this study, a highly crystalline anatase/rutile mixed phase carrageenan/TiO nanocomposite with a larger surface area was synthesized via the sol-gel process and calcined at 450 °C and 650 °C. The synthesized composite materials were characterized by FTIR, XRD, SEM, EDX, TEM, BET and TGA. FTIR confirms the presence of C-Ti-O bond formation in composite.

View Article and Find Full Text PDF

Poly(Acrylic Acid)/TiO Nanocomposite Hydrogels for Paper Artwork Cleaning and Protection.

Molecules

December 2024

Department of Chemical Engineering Materials Environment, Sapienza University of Rome, Via del Castro Laurenziano 7, 00161 Rome, Italy.

Paper-based artworks are prone to natural aging processes driven by chemical and biological processes. Numerous treatments have been developed to mitigate deterioration and prevent irreversible damage. In this study, we investigated the use of poly(acrylic acid)/TiO composite hydrogels, combining their cleaning and protective functions in a minimally invasive treatment.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!