Corrosion of AlO-Ti composites under inflammatory condition in simulated physiological solution.

Alumina-titanium composites have shown good mechanical properties which makes them promising for orthopedic applications. The placement of an orthopedic implant involves an invasive procedure which stimulates a localized inflammatory response causing an acidic environment around the implant. This makes the study on corrosion more critical. Therefore, the aim of the present paper was to study the corrosion behavior of the composites with 75 vol% and 50 vol% Ti content (with alumina balance) fabricated by Spark Plasma Sintering under acidic condition representing inflammation and in two elapsed times (1 h and 1-day) using polarization and electrochemical impedance spectroscopy tests. For comparison, the experiments were also conducted in normal physiological solution after 1 h, and pure Ti (100vol%Ti) was fabricated by the same process and analyzed, similarly. Furthermore, behavior of the samples was studied after 48 days of immersion in the acidic and normal solutions using SEM, ATR-FTIR, AFM, and ICP-OES. The results of corrosion tests showed very good passivation behavior of 100vol%Ti and the composite containing 75vol.%Ti. The superiority of the 75vol.%Ti composite in corrosion characteristics in both solutions was also found. Its corrosion resistance was 20.3 MΩcm under the inflammatory condition after 1-day, which was 39% higher than that of 100vol.%Ti under the same condition. The results of SEM indicated both corroded and mineral deposition zones on all materials' surfaces and the ATR-FTIR results revealed additional adsorbed bands related to water adsorption, OH and carbonate groups after immersion. The AFM analysis showed rougher morphology, particularly for 75 vol% Ti where the Rq was increased about 50 nm, and the ICP-OES results indicated 65.87% and 61.94% deposition of solution calcium on 75vol.%Ti and 50vol.%Ti, respectively. The acidic/inflammatory condition influenced the corrosion processes of all materials. Lower pH caused the passivation to occur sooner and the corrosion resistance to be higher.