This paper reports the fabrication of indium gallium tin oxide (IGTO) thin-film transistors (TFTs) with ultraviolet (UV)-treated PVP- co-PMMA-based hybrid gate insulators at an extremely low temperature (≤150 °C). Synergetic hafnia loading and UV treatment were used to tailor the mechanical softness and hydroxyl fraction in the polymer dielectric film. The UV-treated hybrid dielectric film had a low hydroxyl concentration, a smoother surface, and a denser packing nature, which can be explained by the high ionicity of hafnium oxide and photon-assisted improvement in the cohesion between organic and inorganic materials. Suitability of the UV-treated hybrid dielectric film as a gate insulator was evaluated by fabricating bottom gate TFTs with sputtered IGTO films as a channel layer, which showed high carrier mobility at a low temperature. The resulting IGTO TFTs with a UV-treated hybrid gate insulator exhibited a remarkable high field-effect mobility of 25.9 cm/(V s), a threshold voltage of -0.2 V, a subthreshold gate swing of 0.4 V/decade, and an I ratio of >10 even at a low annealing temperature of 150 °C. The fabricated IGTO TFTs with the UV-treated hybrid dielectric film on the plastic substrate were shown to withstand the 100 times mechanical bending stress even under an extremely small curvature radius of 1 mm due to the intrinsic stretchability of the hybrid dielectric film.

Download full-text PDF

Source
http://dx.doi.org/10.1021/acsami.9b02935DOI Listing

Publication Analysis

Top Keywords

dielectric film
20
uv-treated hybrid
16
hybrid dielectric
16
low temperature
12
hafnium oxide
8
indium gallium
8
gallium tin
8
tin oxide
8
hybrid gate
8
gate insulator
8

Similar Publications

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!