Objective: The aim of this study was to evaluate the effect of displacement patterns of the molar teeth in response to different asymmetric headgear loading using 3D finite element method.
Methods: A series of twenty-five facebow with different left vs. right outer bow length and different expansion of left vs. right were designed. The non-favored side (right side) was shortened at intervals of 10 mm, and favored side (left side) was expanded 10 degree greater than right side and 5 degree expansion were successively added. At the first phase, each side received 200-g load, implying the neck strap to displace toward shorter arm. At the second phase, a total of 400-g load was applied to the ends of the outer bow. Because of the neck strap displacement, the shorter arm received greater load than the left side, the magnitude of the applied force to each side depended on difference of left vs. right outer bow length and expansion.
Results: All systems were effective in promoting asymmetric distal movement of the molars. However, the asymmetrical facebow with the 40 mm shortening and 25 degree expansion outer bow when unequal force applied could be used in asymmetric mechanics. Medial and occlusal displacing forces were observed in all systems.
Conclusions: Both equal and unequal force application is effective for molar distalization. Expansion of the outer bow in the affected side and shortening of the outer bow in the normal side were effective to produced differential distal molar movement.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6526760 | PMC |
| http://dx.doi.org/10.1590/2177-6709.24.2.41.e1-6.onl | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Study on the Mechanical Properties of a Carbon-Fiber/Glass-Fiber Hybrid Foam Sandwich Structure.
Materials (Basel)
April 2024
School of Marine Engineeting, Jimei University, Xiamen 361021, China.
Considering the different structural strength requirements of different parts of fiberglass yachts, carbon fiber/glass fiber hybrid reinforcement can be applied to the skins of sandwich panels in special areas. This paper designs and prepares 12 foam sandwich panel samples composed of pure carbon fiber, a carbon fiber/glass fiber hybrid, pure glass fiber skin, and PVC and SAN foam sandwich, with reference to the layup structure of the outer panel of a fiberglass yacht. Through a comparative analysis of low-speed impact experiments, edge compression experiments, and short beam three-point bending experiments, we seek the optimal carbon fiber/glass fiber hybrid layup design scheme for local structures to guide production.
View Article and Find Full Text PDFApplication of Python-Based Abaqus Secondary Development in Laser Shock Forming of Aluminum Alloy 6082-T6.
Micromachines (Basel)
March 2024
College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao 266590, China.
Aluminum alloy 6082-T6 is an important material for manufacturing the outer skin of high-speed trains, and laser shock forming can realize the rapid forming of complex-shaped plates. In order to improve the efficiency of the simulation modeling of laser shock forming for aluminum alloy 6082-T6, Python scripting language was used for the secondary development of Abaqus. A plugin was utilized to simulate and analyze the laser shock forming process of aluminum alloy 6082-T6.
View Article and Find Full Text PDFInside the magnetosheath, the IBEX-Hi energetic neutral atom (ENA) imager measures a distinct background count rate that is more than 10 times the typical heliospheric ENA emissions observed when IBEX is outside the magnetosheath. The source of this enhancement is magnetosheath ions of solar wind (SW) origin that deflect around the Earth's magnetopause (MP), scatter and neutralize from the anti-sunward part of the IBEX-Hi sunshade, and continue into the instrument as neutral atoms, behaving indistinguishably from ENAs emitted from distant plasma sources. While this background pollutes observations of outer heliospheric ENAs, it provides a clear signature of IBEX crossings over the magnetospheric boundaries.
View Article and Find Full Text PDFShocks in the Very Local Interstellar Medium.
Space Sci Rev
May 2022
Center for Space Plasma and Aeronomic Research (CSPAR), University of Alabama in Huntsville, Huntsville, AL 35805 USA.
Large-scale disturbances generated by the Sun's dynamics first propagate through the heliosphere, influence the heliosphere's outer boundaries, and then traverse and modify the very local interstellar medium (VLISM). The existence of shocks in the VLISM was initially suggested by Voyager observations of the 2-3 kHz radio emissions in the heliosphere. A couple of decades later, both Voyagers crossed the definitive edge of our heliosphere and became the first ever spacecraft to sample interstellar space.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!