Building surface materials as sources of micropollutants in building runoff: A pilot study.

Sci Total Environ

Urban Water Engineering, Department of Civil, Environmental and Natural Resources Engineering, Luleå University of Technology, 971 87 Luleå, Sweden.

Published: August 2019

Control of diffuse pollution is critical for achieving good surface water quality status. In this context, pollutant contributions from building materials have received increased attention in recent decades. This study examined the releases of metals, nonylphenols and phthalates from ten common building surface materials (installed in triplicates) into rainwater runoff from six rain events. The highest releases of metals were from copper and zinc sheets (average concentrations of 3090 μg/L Cu and 7770 μg/L Zn respectively), while other metal materials, e.g., Corten weathering steel, exhibited lower releases. PVC roofing released high concentrations of nonylphenols and phthalates (average concentrations of up to 26 μg/L nonylphenols and 455 μg/L Diisononyl phthalate, DINP) which have not been investigated in the earlier studies. Pollutant releases varied between events, likely because of weather conditions and rainfall characteristics. Study findings should be valuable for environmentally responsible applications of the existing building materials and the development of new ones, as well as the investigations and risk assessment of specific pollutants in stormwater.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.scitotenv.2019.05.088DOI Listing

Publication Analysis

Top Keywords

building surface
8
surface materials
8
building materials
8
releases metals
8
nonylphenols phthalates
8
average concentrations
8
building
5
materials
5
materials sources
4
sources micropollutants
4

Similar Publications

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!