Water electrolysis to form hydrogen as a solar fuel requires highly effective catalysts. In this work, theoretical and experimental studies are performed on the activity and stability of Ni-Mo cathodes for this reaction. Density functional theory studies show various Ni-Mo facets to be active for the hydrogen evolution reaction, Ni segregation to be thermodynamically favorable, and Mo vacancy formation to be favorable even without an applied potential. Electrolyte effects on the long-term stability of Ni-Mo cathodes are determined. Ni-Mo is compared before and after up to 100 h of continuous operation. It is shown that Ni-Mo is unstable in alkaline media, owing to Mo leaching in the form of MoO , ultimately leading to a decrease in absolute overpotential. It is found that the electrolyte, the alkali cations, and the pH all influence Mo leaching. Changing the cation in the electrolyte from Li to Na to K influences the surface segregation of Mo and pushes the reaction towards Mo dissolution. Decreasing the pH decreases the OH concentration and in this manner inhibits Mo leaching. Of the electrolytes studied, in terms of stability, the best to use is LiOH at pH 13. Thus, a mechanism for Mo leaching is presented alongside ways to influence the stability and make the Ni-Mo material more viable for renewable energy storage in chemical bonds.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6773243 | PMC |
http://dx.doi.org/10.1002/cssc.201900617 | DOI Listing |
Small
December 2024
College of Chemistry and Environmental Engineering, Shenzhen University, Shenzhen, Guangdong, 518060, P. R. China.
Electrocatalytic water splitting is considered one of the most promising approaches for large-scale hydrogen production. However, designing transition metal catalysts with high durability under acidic conditions remains a significant challenge. The durability of the catalyst is closely related to the changes of the catalyst during its operation, and constructing effective surface reconstruction strategies can help address the durability issues of transition metals in acidic hydrogen evolution reactions (HER).
View Article and Find Full Text PDFAdv Mater
November 2024
Institute of New-Energy Materials, Key Laboratory of Advanced Ceramics and Machining Technology of Ministry of Education, School of Materials Science and Engineering, Tianjin University, Tianjin, 300072, China.
Molecules
July 2024
School of Biological and Chemical Engineering, Zhejiang University of Science and Technology, Hangzhou 310023, China.
To explore advanced oxidation catalysts, peroxymonosulfate (PMS) activation by Co-Ni-Mo/carbon nanotube (CNT) composite catalysts was investigated. A compound of NiCoS, MoS, and CNTs was successfully prepared using a simple one-pot hydrothermal method. The results revealed that the activation of PMS by Co-Ni-Mo/CNT yielded an exceptional Rhodamine B decolorization efficiency of 99% within 20 min for the Rhodamine B solution.
View Article and Find Full Text PDFSmall
October 2024
State Key Laboratory of Advanced Chemical Power Sources (SKL-ACPS), School of Chemistry and Chemical Engineering, Center of Advanced Electrochemical Energy (CAEE), Institute of Advanced Interdisciplinary Studies, Chongqing University, Chongqing, 400044, China.
The inevitable oxidation of nickel-metal-based catalysts exposed to the air will lead to instability and poor reproducibility of a catalytic interface, which is usually ignored and greatly hinders their application for the catalysis of alkaline hydrogen oxidation. The details on the formation of a world-class nickel-based HOR catalyst Ni-MoO/C-500 are reported via an interfacial reconstruction triggered by passive oxidation upon air exposure. Interfacial reconstruction, initiated with various Ni-Mo metal ratios and annealing temperature, can fine-tune the Ni-Mo interface with an increased work function and a reduced d-band center.
View Article and Find Full Text PDFACS Appl Mater Interfaces
June 2024
School of Materials Science and Engineering, South China University of Technology, Guangzhou 510640, P.R. China.
Nickel-molybdenum-boron (Ni-Mo-B)-based catalysts with biphasic interfaces are highly advantageous in bifunctional electrocatalytic activity in alkaline water-splitting. However, it remains an ongoing challenge to obtain porous Ni-Mo alloy substrates that provide stable adhesion to catalysts, ensuring the long-term performance of bifunctional self-supporting electrodes at a high current density. Herein, a porous Ni-Mo alloy substrate was effectively obtained by a cost-effective dealloying process on a commercial Ni-Mo alloy with high-energy crystal planes.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!