Background: Adverse Reaction to Metal Debris (ARMD) is a major reason for revision surgeries in patients with metal-on-metal (MoM) hip replacements. Most failures are related to excessively wearing implant producing harmful metal debris (extrinsic factor). As ARMD may also occur in patients with low-wearing implants, it has been suggested that there are differences in host-specific intrinsic factors contributing to the development of ARMD. However, there are no studies that have directly assessed whether the development of ARMD is actually affected by these intrinsic factors.
Methods: We included all 29 patients (out of 33 patients) with sufficient data who had undergone bilateral revision of ASR MoM hips (58 hips) at our institution. Samples of the inflamed synovia and/or pseudotumour were obtained perioperatively and sent to histopathological analysis. Total wear volumes of the implants were assessed. Patients underwent MARS-MRI imaging of the hips preoperatively. Histological findings, imaging findings and total wear volumes between the hips of each patient were compared.
Results: The difference in wear volume between the hips was clinically and statistically significant (median difference 15.35 mm, range 1 to 39 mm, IQR 6 to 23 mm) (p < 0.001). The median ratio of total wear volume between the hips was 2.0 (range 1.09 to 10.0, IQR 1.67 to 3.72). In majority of the histological features and in presence of pseudotumour, there were no differences between the left and right hip of each patient (p > 0.05 for all comparisons). These features included macrophage sheet thickness, perivascular lymphocyte cuff thickness, presence of plasma cells, presence of diffuse lymphocytic infiltration and presence of germinal centers.
Conclusions: Despite the significantly differing amounts of wear (extrinsic factor) seen between the sides, majority of the histological findings were similar in both hips and the presence of pseudotumour was symmetrical in most hips. As a direct consequence, it follows that there must be intrinsic factors which contribute to the symmetry of the findings, ie. the pathogenesis of ARMD, on individual level. This has been hypothesized in the literature but no studies have been conducted to confirm the hypothesis. Further, as the threshold of metal debris needed to develop ARMD appears to be largely variable based on the previous literature, it is likely that there are between-patient differences in these intrinsic factors, ie. the host response to metal debris is individual.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6499989 | PMC |
http://dx.doi.org/10.1186/s12891-019-2578-0 | DOI Listing |
PLoS One
January 2025
Institute of Wood Technology, Akita Prefectural University, Noshiro, Akita, Japan.
To mitigate global warming, replacing concrete and steel with timber as the primary construction material for construction projects, such as check dams, is being promoted in Japan and other countries. Timber check dams have more limited installation sites than concrete or steel dams because of installation conditions such as locations less susceptible to debris flows and locations where there is constant running water. However, even when the installation conditions are met, engineers and contractors are reluctant to select timber as a construction material because of its high construction cost.
View Article and Find Full Text PDFJ Clin Med
January 2025
Division of Orthopaedics and Traumatology, Cantonal Hospital Winterthur, 8401 Winterthur, Switzerland.
Wear particle reaction is present in every arthroplasty. Sometimes, this reaction may lead to formation of large pseudotumors. As illustrated in this case, the volume of the reaction may be out of proportion to the volume of the wear scar.
View Article and Find Full Text PDFJ Hazard Mater
January 2025
Chongqing Vocational Institute of Engineering, Chongqing 402260, China.
Seasonally inundated areas (SIA) within aquatic systems are characterized by elevated methylmercury (MeHg) production. Nevertheless, the response characteristics of dissolved organic matter (DOM) quality in SIA sediments, including its molecular compositions and structure, and their impacts on the MeHg production are not yet fully understood. This research gap has been addressed through field investigations and microcosm experiments conducted in a metal-polluted plateau wetland.
View Article and Find Full Text PDFInorg Chem
January 2025
College of Environment and Materials Engineering, Yantai University, Yantai 264005, China.
As an attractive optical/heat dynamic management technology, reversible metal electrodeposition/dissolution electrochromism (RME-EC) shows many advantages, including high optical modulation amplitude, wide modulation band, and color neutrality, but also suffers from performance degradation because of uneven dendritic metal deposition as well as the formation/accumulation of isolated metal debris. In this paper, a facile RME-EC system is established in a green and affordable aqueous electrolyte, by making good use of the nondendritic Ni-Cu codeposition. Furthermore, an in situ self-healing strategy is further established by activating the Br/Br couple of the Br-containing electrolyte to improve the EC performance.
View Article and Find Full Text PDFMar Pollut Bull
January 2025
California State University, Los Angeles, 5151 State University Drive ST 305, Los Angeles, CA 90032, USA. Electronic address:
Marine debris such as plastic, metal, and rubber, is a significant source of anthropogenic waste pollution in oceanic waters. Debris continues to be found along Southern California's coastlines and poses serious risks to biodiversity and ecosystem health through entrapment, ingestion, and entanglement. One particular species that drops eggs in the South Bay, particularly in the Palos Verdes peninsula, is the California horn shark (Heterodontus francisci).
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!