Boron removal remains a major barrier to water purification, it is important to develop a specialized adsorption membrane for boron removal. By means of a simple and effective method, a hydrophilic membrane for boron removal with a polyhydroxy functional group on the surface was prepared. Firstly, a polysulfone (PSF) membrane was modified by co-depositing polyethyleneimine (PEI) with dopamine (DA) in one-step to produce amine-rich surfaces, then the DA/PEI-functionalized membranes were reacted with glycidol, with the prepared membranes corresponding to PSF-PDA/PEI membranes and PSF-diol membranes. The prepared membranes were characterized by water-uptake, FTIR, (X-ray photoelectron spectroscopy) XPS, (Field emission scanning electron microscope) FESEM, and zeta potential measurements. The hydrophilicity of the membrane was characterized by the static water contact angle (WCA) test. In addition, we systematically studied the impact of initial boron concentration, chelating time, and pH value on boron removal performance. The results showed that the PSF-diol membrane had strong hydrophilicity with a WCA of about 38°. The maximum adsorption capacity of boron appeared to be 1.61 mmol/g within 10 min at a boron concentration of 300 mg/L. Adsorption kinetics showed that saturation adsorption can be achieved in minutes at the initial concentration of 5 mg/L, which is beneficial to a rapid filtration process.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6572502 | PMC |
| http://dx.doi.org/10.3390/polym11050780 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Research on the Wear Suppression of Diamond Grain Enabled by Hexagonal Boron Nitride in Grinding Cast Steel.
Molecules
December 2024
School of Chemistry and Chemical Engineering, Liaocheng University, Liaocheng 252000, China.
Diamond grinding wheels have been widely used to remove the residual features of cast parts, such as parting lines and pouring risers. However, diamond grains are prone to chemical wear as a result of their strong interaction with ferrous metals. To mitigate this wear, this study proposes the use of a novel water-based hexagonal boron nitride (hBN) as a minimum quantity lubrication (MQL) during the grinding of cast steel and conducted the grinding experiment and molecular dynamics simulation.
View Article and Find Full Text PDFMechanochemical destruction of perfluorooctane sulfonate (PFOS) using boron carbide (BC).
J Hazard Mater
December 2024
State Key Joint Laboratory of Environment Simulation and Pollution Control (SKLESP), Beijing, China; Key Laboratory for Emerging Organic Contaminants Control (BKLEOC), Beijing, China; Laboratory for Environmental Frontier Technologies (BLEFT), School of Environment, Tsinghua University, Beijing 100084, China. Electronic address:
Widespread detection in soils and sediments underscores the potential threats posed by persistent, bioaccumulative and toxic perfluorooctane sulfonate (PFOS) to ecosystems and organisms. Nevertheless, the formidable energy of the C-F bond imparts stability and hampers degradation. This study investigates the potential of boron carbide (BC), a hard-ceramic material often utilized in armor and abrasion contexts, for degrading solid-phase PFOS through ball milling.
View Article and Find Full Text PDFNovel approach to enhance the efficiency of mortar against radiations by co-incorporation of lead and boron compounds with calcium chloride.
Sci Rep
January 2025
Raw Building Materials Technology and Processing Research Institute, Housing & Building National Research Center, HBRC, Cairo, Egypt.
Fabrication of heavy density mortar using aggregates reinforced with available solid inorganic chemical additives is of a great importance as a protective layer to mitigate radiations in nuclear facilities. The effect of lead oxide and borax decahydrate on the hydration kinetics was evaluated by determining setting time, leachability and compressive strength. To speed up the reaction, 0.
View Article and Find Full Text PDFExploring critical pathways using robust strategies: Nanodiamond electrocatalysts for promoting boron removal via electrosorption.
Water Res
December 2024
Department of Global Smart City, Sungkyunkwan University (SKKU), 2066, Seobu-ro, Jangan-gu, Suwon, Gyeonggi-do, 16419, Republic of Korea. Electronic address:
Article Synopsis
- The study introduces a new electrosorption technology using nanodiamonds to effectively remove boron from wastewater, achieving an impressive boron adsorption capacity of 10.5 μmol/g.
- It highlights the importance of different gas purging methods on the electrosorption process and characterizes the deterioration of electrodes through advanced spectroscopy techniques.
- A machine learning model was developed to predict effluent properties and optimize the system, demonstrating the potential of ML in enhancing water treatment processes.
Optimization of Green Extraction Techniques for Polyphenolics in Bark Extract and Steam Gasification of the Remaining Fraction to Obtain Hydrogen-Rich Syngas and Activated Carbon.
ACS Omega
December 2024
Ege University Solar Energy Institute, 35040 Bornova, Izmir, Turkey.
Utilization of renewable resources has become imperative, and considerable efforts have been devoted to tackling diverse global sustainability challenges, which contribute to the circular economy. The focus of this work was to optimize the extraction of polyphenolic compounds in bark using microwave-assisted (MAE) and ultrasonically assisted (UAE) extractions and evaluate the biological efficacies of the extracts. Additionally, the residue of the extracted pine bark was subjected to steam gasification to produce hydrogen-rich syngas and activated carbon.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!