2D reproduction of the face on the Turin Shroud by infrared femtosecond pulse laser processing.

Femtosecond pulse laser processing concentrates a huge quantity of light energy in extremely short pulses of a few tens to hundreds of femtoseconds, enabling superficial laser machining or marking of any kind of materials, with a reduced or insignificant heat affected area. A digitized paper printed image of the face on the Turin Shroud was used to monitor a scan head intercalated between a femtosecond pulsed laser source and a linen fabric sample, enabling the direct 2D reproduction of the image of the face with a laser beam size corresponding to one pixel of the digitized image. The contrast in the marked image was controlled by adjusting the energy density, the number of superimposed pulses per pixel, and the distance between successive impacts. The visual aspect of the laser-induced image is very similar, at naked eye, to the source image. The negative photograph of the marked linen fabric reveals a face remarkably close to the well-known negative picture of the face on the Turin Shroud. Analyses by infrared spectroscopy, Raman spectroscopy, and scanning electron microscopy were performed to characterize the laser marked areas.