Evaluation of engineering properties for waste control of tomato during harvesting and postharvesting.

In Iran, more than 30% of agricultural products turn into waste at different stages from harvesting to consumption. Thus, main factors for performing of this present study are including of: (a) the importance of tomato as an agricultural product and (b) lack of information about reducing waste during tomato processing. In this study, some physical, nutritional, mechanical, and hydrodynamic properties of tomato were measured under standard conditions. Physical properties included the length, width, thickness, mean diameter (geometric and arithmetic), mass, volume, density, sphericity, surface area, and aspect ratio. Also, nutritional properties, moisture, dry matter, pH, total soluble solid (TSS), and titration acidity (TA) of tomato were evaluated. The mechanical properties of tomato (compression and shear) were measured using Instron instrument. The hydrodynamic properties were measured with water in transportation, separation, and sorting of tomatoes. The physical properties were including of length, width, thickness, mass, volume, and geometric and arithmetic mean diameters showed a direct relationship with the size of tomatoes. Also, volumetric mass (density) had an inverse relation with tomato size. Yield point and shear force were obtained 51.27 and 22.20 N, respectively. The nutritional properties such as pH value, TSS, and TA were equal to 4.22, 22.23Brix, and 2%, respectively. The hydrodynamic properties of tomatoes such as the terminal velocity, the tomatoes' rise time in the water column, the buoyancy force, and the drag force were obtained to be equal to 0.05 m/s, 10.11 S, 0.52 N, and 0.17 N, respectively.