Most organic matter (OM) on Earth occurs as kerogen-like materials, that is naturally formed macromolecules insoluble with standard organic solvents. The formation of this insoluble organic matter (IOM) is a topic of much interest, especially when it limits the detection of compounds of geomicrobiological interest. For example, studies that search for biomarker evidence of life on early Earth or other planets usually use solvent-based extractions. This leaves behind a pool of OM as unexplored post-extraction residues, potentially containing diagnostic biomarkers. Since the IOM has an enhanced potential for preservation compared to soluble OM, analysing IOM-released biomarkers can also provide even deeper insights into the ecology of ancient settings, with implications for early Earth and Astrobiology investigations. Here, we analyse the prokaryotic lipid biosignature within soluble and IOM of the Taupo Volcanic Zone (TVZ) silica sinters, which are key analogues in the search for life. We apply sequential solvent extractions and a selective chemical degradation upon the post-solvent extraction residue. Moreover, we compare the IOM from TVZ sinters to analogous studies on peat and marine sediments to assess patterns in OM insolubilisation across the geosphere. Consistent with previous work, we find significant but variable proportions-1%-45% of the total prokaryotic lipids recovered-associated with IOM fractions. This occurs even in recently formed silica sinters, likely indicating inherent cell insolubility. Moreover, archaeal lipids seem more prone to insolubilisation as compared to the bacterial analogues, which might enhance their preservation and also bias overall biomarkers interpretation. These observations are similar to those observed in other settings, confirming that even in a setting where the OM derives predominantly from prokaryotic sources, patterns of IOM formation/occurrence are conserved. Differences with other settings, however, such as the occurrence of archaeol in IOM fractions, could be indicative of different mechanisms for IOM formation that merit further exploration.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1111/gbi.12340 | DOI Listing |
Braz Oral Res
December 2024
Universidade Estadual Paulista - Unesp, Institute of Science and Technology, Department of Dental Materials and Prosthodontics, São José dos Campos, SP, Brazil.
This study evaluated the effect of different occlusal surface finishes (glaze and silica glass infiltration) on surface characteristics and fatigue behavior of partially stabilized zirconia (PSZ) plates adhesively bonded onto epoxy resin discs. PSZ disc specimens (n = 15; Katana blocks STML, Kuraray Noritake Dental) were produced (Ø = 10 mm; thickness = 1.2 mm) and allocated into 3 groups: As sintered (S), silica glass infiltration (SGI), and glaze application (G).
View Article and Find Full Text PDFSci Rep
November 2024
Institute of Low Temperature and Structure Research, Polish Academy of Sciences, Okólna 2, Wrocław, 50-422, Poland.
Extremophiles
November 2024
Department of National Parks, Wildlife and Plant Conservation, Protected Areas Regional Office 13, Chae Son National Park, Lampang, Thailand.
Early characterizations by morphological identification through light microscopy only revealed the presence of a few microbial lineages and the majority of microbial community at the Chae Son hot spring remains uncharacterized. Therefore, this study aims to examine thermophilic microbial communities at the Chae Son hot spring using next-generation sequencing, including investigating hot spring mineralogy. Results suggest that the Chae Son hot spring (49-75 °C, pH = 6.
View Article and Find Full Text PDFMaterials (Basel)
October 2024
Department of Materials Science, Faculty of Mechanical Engineering and Aeronautics, Rzeszow University of Technology, al. Powstańców Warszawy 12, 35-959 Rzeszow, Poland.
The high-energy ball milling process was applied to fabricate a composite material from 7075 aluminium alloy milling chips, silicon carbide, and titanium dioxide powders. Raw materials were ground, and the obtained powders were cold pressed and sintered. It was demonstrated that this method can be used in the recycling of aluminium alloy scrap characterised by a high surface-to-volume ratio, and also that chemical removal of the oxide layer from chips is not necessary.
View Article and Find Full Text PDFMaterials (Basel)
October 2024
Faculty of Civil Engineering, Warsaw University of Technology, Al. Armii Ludowej 16, 00-637 Warsaw, Poland.
This research investigated the properties of modified cementitious composites including water purification from heavy metal-zinc. A new method for characterizing the immobilization properties of tested modifiers was established. Several additions had their properties investigated: biochar (BC), active carbon (AC), nanoparticulate silica (NS), copper slag (CS), iron slag (EAFIS), crushed hazelnut shells (CHS), and lightweight sintered fly ash aggregate (LSFAA).
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!