The downstream nappe wind caused by flood discharge has a great influence on the rainfall distribution, the operational safety of dams, and their surrounding ecological environments. A physical experiment was conducted to measure the spatial distribution of the downstream nappe wind and the splash for a continuous bucket (CB) and a tongue-shaped bucket (TB) for five bucket angles (40°, 45°, 50°, 55°, and 60°). The experimental results demonstrate that the trajectory width and height of the nappe increase as the angles increase, but the effect on the length is converse. The wind velocity and splash weight of the two buckets decrease along the flowing direction. In the lateral direction, the wind velocity and splash weight for the CB decrease as increases, but the wind velocity of the TB trends to humplike; its splash weight decreases near the axis of the bucket, and is stable in the other region. In the vertical direction, the velocity for the CB increases and then decreases as increases, but that for the TB decreases monotonously. The velocity of the wind and weight of the splash for the CB decreases with the increasing angles, but those of the TB peak at 45°. The findings are useful for the more accurate prediction of rainfall.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6517982 | PMC |
http://dx.doi.org/10.3390/ijerph16081360 | DOI Listing |
Int J Environ Res Public Health
April 2019
State Key Laboratory of Hydraulic Engineering Simulation and Safety, Tianjin University, Tianjin 300350, China.
The downstream nappe wind caused by flood discharge has a great influence on the rainfall distribution, the operational safety of dams, and their surrounding ecological environments. A physical experiment was conducted to measure the spatial distribution of the downstream nappe wind and the splash for a continuous bucket (CB) and a tongue-shaped bucket (TB) for five bucket angles (40°, 45°, 50°, 55°, and 60°). The experimental results demonstrate that the trajectory width and height of the nappe increase as the angles increase, but the effect on the length is converse.
View Article and Find Full Text PDFInt J Environ Res Public Health
January 2019
State Key Laboratory of Hydraulic Engineering Simulation and Safety, Tianjin University, 92 Weijin Road, Nankai District, Tianjin 300072, China.
Flood discharge atomization is a serious challenge that threatens the daily lives of the residents around the dam area as well as the safety of the water conservancy project. This research aims to improve the prediction accuracy of the stochastic splash model. A physical model test with four types of flip bucket is conducted to obtain the hydraulic parameters of the impinging outer edge of the water jet, the relationship of the splashing droplet diameter with its corresponding velocity, and the spatial distribution of the downstream nappe wind.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!