The InAs/InAsSb type-II superlattices (T2SLs) grown on a GaSb buffer layer and GaAs substrates were theoretically investigated. Due to the stability at high operating temperatures, T2SLs could be used for detectors operating in the longwave infrared (LWIR) range for different sensors to include, e.g., CH and CH detection, which is very relevant for health condition monitoring. The theoretical calculations were carried out by the 8 × 8 k·p method. The estimated electrons and heavy holes probability distribution in a InAs/InAsSb superlattice (SL) shows that the wave function overlap increases while the thickness of the SL period decreases. The change in the effective masses for electrons and holes versus the SL period thickness for the k-direction of the Brillouin zone is shown. The structures with a period lower than 15 nm are more optimal for the construction of LWIR detectors based on InAs/InAsSb SLs. The experimental results of InAs/InAsSb T2SLs energy bandgap were found to be comparable with the theoretical one. The proper fitting of theoretically calculated and experimentally measured spectral response characteristics in terms of a strain-balanced and unbalanced structures is shown.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6514879 | PMC |
| http://dx.doi.org/10.3390/s19081907 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
AlGaN/AlN heterostructures: an emerging platform for integrated photonics.
Npj Nanophoton
January 2025
Department of Physics, Humboldt-Universität zu Berlin, Berlin, Germany.
We introduce a novel material for integrated photonics and investigate aluminum gallium nitride (AlGaN) on aluminum nitride (AlN) templates as a platform for developing reconfigurable and on-chip nonlinear optical devices. AlGaN combines compatibility with standard photonic fabrication technologies and high electro-optic modulation capabilities with low loss over a broad spectral range, from UVC to long-wave infrared, making it a viable material for complex photonic applications. In this work, we design and grow AlGaN/AlN heterostructures and integrate several photonic components.
View Article and Find Full Text PDFUnipolar Barrier Photodetectors Based on Van Der Waals Heterostructure with Ultra-High Light On/Off Ratio and Fast Speed.
Adv Sci (Weinh)
January 2025
Information Materials and Intelligent Sensing Laboratory of Anhui Province, Key Laboratory of Structure and Functional Regulation of Hybrid Materials of Ministry of Education, Institutes of Physical Science and Information Technology, Anhui University, 111 Jiu Long Road, Hefei, 230601, China.
Unipolar barrier architecture is designed to enhance the photodetector's sensitivity by inducing highly asymmetrical barriers, a higher barrier for blocking majority carriers to depressing dark current, and a low minority carrier barrier without impeding the photocurrent flow through the channel. Depressed dark current without block photocurrent is highly desired for uncooled Long-wave infrared (LWIR) photodetection, which can enhance the sensitivity of the photodetector. Here, an excellent unipolar barrier photodetector based on multi-layer (ML) graphene (G) is developed, WSe, and PtSe (G-WSe-PtSe) van der Waals (vdW) heterostructure, in which extremely low dark current of 1.
View Article and Find Full Text PDFHomogeneous boiling over melting ice.
Sci Rep
January 2025
Mechanical Engineering Department, University of South Florida, Tampa, FL, 33620, USA.
We report on discovering the homogeneous boiling within a liquid film residual resting in equilibrium over a melting ice block. This phenomenon was induced via longwave infrared radiation generated by a continuous wave [Formula: see text] laser. This investigation employed a high-speed camera and the Schlieren visualization technique.
View Article and Find Full Text PDFPixel-Based Long-Wave Infrared Spectral Image Reconstruction Using a Hierarchical Spectral Transformer.
Sensors (Basel)
November 2024
Key Laboratory of Space Active Opto-Electronics Technology, Shanghai Institute of Technical Physics, Chinese Academy of Sciences, Shanghai 200083, China.
Long-wave infrared (LWIR) spectral imaging plays a critical role in various applications such as gas monitoring, mineral exploration, and fire detection. Recent advancements in computational spectral imaging, powered by advanced algorithms, have enabled the acquisition of high-quality spectral images in real time, such as with the Uncooled Snapshot Infrared Spectrometer (USIRS). However, the USIRS system faces challenges, particularly a low spectral resolution and large amount of data noise, which can degrade the image quality.
View Article and Find Full Text PDFMid-infrared photodetection with 2D metal halide perovskites at ambient temperature.
Sci Adv
December 2024
Department of Chemical and Environmental Engineering, Yale University, 9 Hillhouse Avenue, New Haven, CT 06520, USA.
Article Synopsis
- Detection of mid-infrared (MIR) light is vital for various technologies like night vision and thermal imaging, yet traditional methods often require complex setups or cooling.
- This study introduces a novel approach using two-dimensional metal halide perovskites (2D-MHPs) that enables high-sensitivity detection of MIR light at room temperature, with capabilities down to 1 nanowatt per square micrometer.
- The technology achieves further sensitivity improvements using unique membrane structures and photonic strategies, covering a range of infrared wavelengths from 2 to 10.6 micrometers, paving the way for advancements in areas like environmental monitoring and molecular sensing.
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!