One of the most important issues related to adiabatic shear failure is the correlation among temperature elevation, adiabatic shear band (ASB) formation and the loss of load capacity of the material. Our experimental results show direct evidence that ASB forms several microseconds after stress collapse and temperature rise reaches its maximum about 30 μs after ASB formation. This observation indicates that temperature rise cannot be the cause of ASB. Rather, it might be the result of adiabatic shear localization. As such, the traditional well-accepted thermal-softening mechanism of ASB needs to be reconsidered.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1103/PhysRevLett.122.015503 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
How magnetic reconnection is triggered or suppressed is an important outstanding problem. By considering pinching of a current sheet that has formed at non-equilibrium, we show that the background plasma beta is a major controlling factor in the onset and nature of magnetic reconnection. A high plasma beta inhibits a current sheet from pinching down to kinetic scales required for collisionless reconnection, while a low beta facilitates it.
View Article and Find Full Text PDFAdiabatic Shear Localization in Metallic Materials: Review.
Materials (Basel)
November 2024
Department of Mechanical, Industrial and Mechatronics Engineering, Toronto Metropolitan University, Toronto, ON M5B 2K3, Canada.
In advanced engineering applications, there has been an increasing demand for the service performance of materials under high-strain-rate conditions where a key phenomenon of adiabatic shear instability is inevitably involved. The presence of adiabatic shear instability is typically associated with large shear strains, high strain rates, and elevated temperatures. Significant plastic deformation that concentrates within a adiabatic shear band (ASB) often results in catastrophic failure, and it is necessary to avoid the occurrence of such a phenomenon in most areas.
View Article and Find Full Text PDFNumerical Study on the Development of Adiabatic Shear Bands During High Strain-Rate Compression of AISI 1045 Steel: A Comparative Analysis Between Plane-Strain and Axisymmetric Problems.
Materials (Basel)
October 2024
Laboratory of Manufacturing Technology, School of Mechanical Engineering, National Technical University of Athens, Heroon Polytechniou 9, 15780 Athens, Greece.
This work studies numerically the development of adiabatic shear banding (ASB) during high strain-rate compression of AISI 1045 steel. Plane strain and cylindrical axisymmetric compressions are simulated in LS-DYNA, considering rectangular and cylindrical steel samples, respectively. Also, a parametric analysis in height-to-base ratio is conducted in order to evaluate the effect of geometry and dimensional ratio of the sample on ASB formation.
View Article and Find Full Text PDFEffect of Laser on the Interface and Thermal Conductivity of Metallized Diamond/Cu Composite Coatings Deposited by Supersonic Laser Deposition.
Materials (Basel)
October 2024
Institute of Laser Advanced Manufacturing, Zhejiang University of Technology, No. 288 Liuhe Road, Hangzhou 310023, China.
To achieve the rapid heat dissipation of components in the industrial field, the heat dissipation coating is prepared on the surface, which is conducive to improving the service life of the parts and greatly reducing the industrial costs. In this paper, metallized diamond/Cu composite coatings were fabricated on 1060Al substrate by supersonic laser deposition. The composite coatings were prepared at a nitrogen pressure of 3.
View Article and Find Full Text PDFInterfacial energy conversion mechanism between 3003 aluminum alloy and 321 stainless steel in vaporizing foil actuator welding process.
Sci Rep
October 2024
School of Mechanical Engineering, Shijiazhuang Tiedao University, Shijiazhuang, 050043, China.
Conventional welding methods encounter significant challenges, including poor weldability, low joint strength, and the formation of brittle intermetallic compounds, primarily due to the substantial disparities in the physical and chemical properties of aluminum and iron. To mitigate these issues, the vaporizing foil actuator welding (VFAW) process has emerged as a highly promising solid-phase welding technology, particularly suitable for joining dissimilar metals with pronounced differences in properties, such as aluminum alloys and stainless steels. The present study provides an innovative quantitative analysis of the interfacial impact energy conversion mechanisms within the VFAW process.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!