Background/purpose: The primeval evaluation of the properties of composite resins with different compositions that impact clinical behavior is very important in guiding use in clinical settings. The aim of this study was to evaluate color stability (ΔE) and Knoop microhardness (KHN) of composite resins containing different compositions.
Materials And Methods: Forty-five disks were made composite resins: Filtek Z350 XT/3MESPE and Beautifill II/SHOFU and divided into 3 subgroups: Control - immersed in artificial saliva; OB - brushing with Oral B 3D White; CT - brushing with Colgate Total 12. The OB and CT groups had the disks brushed daily with 120 cycles after immersion in coffee solution (10 min) for a period of 30 days. ΔE and KHN was obtained at baseline and after the treatments. Data were analyzed ANOVA and Tukey tests ( < 0.05).
Results: ANOVA revealed significant differences for ΔE and KHN. ΔE: the highest mean was observed in Beautifil II composite resin group, which differed significantly from Z350 group. For the Beautifil II, the treatments were significantly different from each other. For the Z350, the control group showed significant differences in relation to OB e CT groups. KHN: the highest mean was observed in Z350 group, which differed significantly from Beautifil II group. For Z350, the control group showed significant differences in relation to OB e CT groups. For Beautifil II, the treatments did not differ significantly among themselves.
Conclusion: The composite resin containing fluoride in the composition showed higher color alteration (ΔE) and lower Knoop microhardness (KHN), thus demonstrating that composition is an important factor in the clinical performance of esthetic restorative materials.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6445979 | PMC |
| http://dx.doi.org/10.1016/j.jds.2018.11.005 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Esthetic Solutions in Pediatric Patients With Conical Teeth, From Digital Planning to Execution.
J Dent Child (Chic)
September 2024
School of Dentistry, Ceuma University, Imperatriz, Maranhão, Brazil.
The quest for an esthetically pleasing smile is a key driver in seeking dental interventions aimed at achieving a more balanced and harmonious appearance. The purpose of this report is to discuss the restoration of conical lateral incisors in an 11-year-old patient. The treatment approach employed direct composite resin restorations associated with the Digital Smile Design (DSD) technology.
View Article and Find Full Text PDFIncreasing Printable Solid Loading in Digital Light Processing Using a Bimodal Particle Size Distribution.
3D Print Addit Manuf
October 2024
Department of Mechanical Engineering, University of Massachusetts Lowell, Lowell, Massachusetts, USA.
Digital light processing (DLP) is rapidly growing in popularity as an additive manufacturing method for the fabrication of composite structures, and is an effective way to prepare high-resolution filled parts, such as ceramic green parts or composite magnets. Yet, higher solid loadings of resins and the resulting dramatic increases in viscosity limit DLP printing for applications that depend upon maximization of filler content. In this work, we investigate the capacity of a bimodal particle size distribution to enable the printing of a photosensitive resin containing up to 70 vol% of fillers.
View Article and Find Full Text PDFInfluence of chlorhexidine dentin disinfection on universal adhesive performance: Interfacial adaptation and bond strength assessments.
PLoS One
December 2024
Departement of Restorative Dentistry, Faculty of Dentistry, King Abdulaziz University, Jeddah, Saudi Arabia.
Purpose: This study aimed to investigate the effect of chlorhexidine (CHX) cavity disinfectant on interfacial microleakage and micro-tensile bond strength (μTBS) of a universal adhesive bonded to dentin in both self-etch (SE) and etch-and-rinse (ER) modes.
Methods: Class I cavities were prepared in the coronal dentin of extracted human teeth and assigned to two etching modes (SE or ER), then subdivided by disinfection with or without CHX (n = 5). Cavities were restored using Single Bond Universal Adhesive and Filtek Z350 XT composite.
Prospective, randomized clinical trial evaluating the clinical performance of a new universal adhesive in Class I and Class II restorations at 1 year.
Clin Oral Investig
December 2024
Department of Primary Dental Care, University of Minnesota School of Dentistry, Minneapolis, MN, 55455, USA.
Objective: This randomized controlled trial compared the 1-year clinical efficacy of Scotchbond Universal Adhesive Plus (SBU+) with that of its predecessor Scotchbond Universal Adhesive (SBU) to restore Class I and Class II preparations using the self-etch strategy in adult patients.
Materials And Methods: Fifty-one subjects participated in this study. Two posterior teeth in each subject were randomized to a restoration with SBU+ or to a restoration with SBU (control) using the self-etch strategy.
A comparative evaluation of commercially available short fiber-reinforced composites.
BMC Oral Health
December 2024
Department of Biomaterials Science and Turku Clinical Biomaterial Center -TCBC, Institute of Dentistry, University of Turku, Turku, Finland.
Background: Short fiber-reinforced composites (SFRCs) are restorative materials for large cavities claimed to effectively resist crack propagation. This study aimed to compare the mechanical properties and physical characteristics of five commercially available SFRCS (Alert, Fibrafill Flow, Fibrafill Dentin, everX Flow, and everX Posterior) against a conventional particulate-filled composite (PFC, Essentia Universal).
Methods: The following characteristics were evaluated in accordance with ISO standards: flexural strength and modulus and fracture toughness.
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!