Objectives: This study aimed to evaluate the influence of different shades and brands of resin-based luting agents on the final color of a leucite-reinforced veneering ceramic.
Methods: This in-vitro study was done on 36 ceramic discs (IPS Empress I, 11 × 0.5 mm, A2 shade) and 36 cement disks (11 × 0.2 mm) made of Panavia SA Cement Plus (Kuraray Medical Inc.) and Choice2 (Bisco Inc., Schumburg) brands in translucent, universal A2, and opaque shades (n = 6 per each color in each resin cement brand). Color parameters (CIELab) of ceramic specimens were calculated without and with each brand/shade of resin-based luting agents by using a spectrophotometer, and put into CIELab formula. The color differences (ΔE) between the two sets of measurements were calculated and analyzed with two-way ANOVA and Tukey's post hoc test (α = 0.05).
Results: Both the resin-based luting agent shade (P < 0.001) and brand (P = 0.023) significantly affected the color differences. ΔE values were significantly different between Panavia-opaque and Choice2-opaque (P < 0.001). No significant difference existed between ΔE of the two brands in A2 (P = 0.178) and translucent shades (P = 0.079). The ΔE values of Panavia-A2 was significantly different from the translucent and opaque shades of the same brand. Moreover, the ΔE of Choice2-translucent shade was significantly lower than that of A2 and opaque shades. The ΔE values were higher than the clinically-acceptable threshold in all groups (ΔE > 3.7) except for Choice2-translucent (ΔE = 3.37).
Conclusions: The final color of leucite-reinforced veneering ceramic can be affected by the same shades of resin-based luting agents from different brands and different shades of resin-based luting agents from the same brand.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6445440 | PMC |
| http://dx.doi.org/10.1016/j.sdentj.2019.02.045 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Article Synopsis
- The study evaluated the effectiveness of various cements for securing implant restorations, including a temporary zinc-oxide cement, a resin-modified glass ionomer cement, and a resin-based, eugenol-free cement.
- Results showed that the resin-modified glass ionomer cement had the highest retention forces, followed by the resin-based cement, with the zinc-oxide cement having the lowest retention.
- While all cements offered adequate retention, the resin-based cement required more effort for removal compared to the other two, indicating potential challenges in future procedures.
Exploring the influence of tooth, ceramic, and resin luting agent variations on laminate veneer optical characteristics: a prospective clinical investigation.
Clin Oral Investig
November 2024
Graduate Program in Dentistry, School of Dentistry, Federal University of Pelotas, (UFPel), Rua Gonçalves Chaves 457, Room 505, Pelotas, RS, 96015-560, Brazil.
Objective: This study evaluated the influence of tooth shade, resin-based luting agent shade values, and ceramic thickness on the optical properties of CLVs.
Materials And Methods: The study involved 16 participants who received 95 CLVs. CIE L*, a*, b* color coordinates were assessed with a clinical spectrophotometer.
Effect of Different Surface Treatments on the Bonding Strength of Three Different Post Biomaterials to a Resin-Based Luting Agent.
J Pharm Bioallied Sci
July 2024
Founder of Simpli Board, Surrey, British Columbia, Canada.
Aim: The aim of this study was to evaluate how different post-surface treatments affect the ability of luting cement to bond three different dental post materials to a resinous surface.
Materials And Methods: The study analyzed a total of 108 posts categorized into three main groups: stainless steel, cast, and fiber posts. Next, the core group was divided into four subgroups ( = 9) according to the type of surface treatment applied: no surface treatment (NS), silanization (SZ), sandblasting (SB), and sandblasting plus silanization (SBSZ).
Article Synopsis
- Lab-made abutments and zirconia crowns need to be disinfected before use, and this study focused on how different cleaning and aging methods affect the bond strength between materials.
- Cleaning methods like autoclaving improved the bond strength significantly compared to no cleaning and other disinfection methods.
- Over time, while autoclaving provides an initial advantage in bond strength, the difference narrows as the materials age, showing no significant changes with different zirconia types or aging methods.
Wear characteristics of resin-based luting agents used in the bonded CAD-CAM resin blocks.
Dent Mater J
December 2024
Department of Applied Prosthodontics, Graduate School of Biomedical Sciences, Nagasaki University.
This study aimed to investigate the wear and microhardness of luting agents and computer-aided design-computer-aided manufacturing (CAD-CAM) resin blocks, and to compare the wear characteristics of resin-based luting agents used in bonded specimens of CAD-CAM resin blocks. After three-body wear test, the amount of wear and Vickers hardness were measured and Pearson's correlation coefficient was calculated. The lowest amount of wear and the highest Vickers hardness values were obtained for Estecem II.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!