The present study aims to improve the mechanical properties of epoxy composite by incorporating supported ionic liquid silica (IL-silica). The IL-silica not only showed improved interfacial interaction and reinforcement, but also served as cure agent of epoxy composites. The differential scanning calorimetry analysis revealed that epoxy composites could be successfully cured with IL-silica without any routine curing agents. IL-silica/epoxy composites presented higher mechanical and thermal properties compared with epoxy composite containing un-functionalized silica (u-silica). The dynamic mechanical analysis showed that the storage modulus of composites significantly increased with the addition of IL-silica in comparison to that with added u-silica, as well as the variation of Tg parameter. The incorporation of IL-silica simultaneously enhanced the tensile strength, toughness, and thermal stability of the epoxy composites. The considerable improvements in mechanical and thermal properties are ascribed to the improved dispersion of IL-silica and the enhanced interfacial interactions between epoxy matrix and IL-silica by strong covalent bonding, which results in an effective load transfer.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6418587 | PMC |
| http://dx.doi.org/10.3390/polym9100478 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Interphase investigation of modified McLachlan model and the 3D finite element method for electrical conductivity.
Heliyon
January 2025
Faculty of Mechanical Technology and Engineering, Universiti Teknikal Malaysia Melaka (UTeM), Durian Tunggal, Melaka, 76100, Malaysia.
This paper explores the electrical conductivity interphase of Ag/Epoxy composite using modified McLachlan theory and 3D finite element composite model through experimental verification. The model characteristic presents conductivity as a dynamic function influenced by particle content, particle electrical properties, electrical properties transition, and an exponent. This model was meticulously crafted, considering the intricate interplay between the polymer matrix and silver particles, the tunnelling distance between adjacent silver particles, and the interphase regions around particles.
View Article and Find Full Text PDFA 15 month-monitoring of biofouling in relationship with hydrological parameters and contaminants in three French harbours of the English Channel.
Environ Res
January 2025
Université de Caen Normandie, Alliance Sorbonne Université, MNHN, UA, CNRS, IRD, Biologie des Organismes et Ecosystèmes Aquatiques (BOREA), Esplanade de la Paix, 14032 Caen, France; MERSEA UR 7482, Université de Caen Normandie, Esplanade de la Paix, 14032 Caen, France.
Three French harbours connected to different water masses of the English Channel were chosen to investigate the hydrological parameters, chemical contaminants, and biofouling characteristics for 15 months. The biofouling development on two kinds of coatings, an anticorrosion coating (Epoxy) and a foul-release coating (FRC), was studied to compare micro- and macro- biofouling in harbour environments. Biofouling was investigated by considering wet biofouling biomass and composition, microalgae concentration, and bacterial abundance.
View Article and Find Full Text PDFResearch of mesoporous silica loaded lignin to enhance the anti-corrosion and anti-weathering performance of epoxy surface.
Int J Biol Macromol
January 2025
Key Laboratory of Automobile Materials, Ministry of Education, and College of Materials Science and Engineering, Jilin University, Changchun 130025, China. Electronic address:
A new type of filler was added to epoxy resin to prepare a composite coating with excellent corrosion and weathering resistance. The simple synthesis process and nonpolluting raw materials of this filler contribute to the development of green chemistry. Specifically, lignin was encapsulated in mesoporous silica, the synergistic effect between the two resulted in the formation of lignin/mesoporous silica composite particles (MSN-L) with excellent ultraviolet (UV) resistance.
View Article and Find Full Text PDFFlexural Response Comparison of Nylon-Based 3D-Printed Glass Fiber Composites and Epoxy-Based Conventional Glass Fiber Composites in Cementitious and Polymer Concretes.
Polymers (Basel)
January 2025
School of Civil Engineering and Environmental Science, University of Oklahoma, 202 W Boyd St., Norman, OK 73019, USA.
With 3D printing technology, fiber-reinforced polymer composites can be printed with radical shapes and properties, resulting in varied mechanical performances. Their high strength, light weight, and corrosion resistance are already advantages that make them viable for physical civil infrastructure. It is important to understand these composites' behavior when used in concrete, as their association can impact debonding failures and overall structural performance.
View Article and Find Full Text PDFNumerical Modelling of Hybrid Polymer Composite Frame for Selected Construction Parts and Experimental Validation of Mechanical Properties.
Polymers (Basel)
January 2025
Department of Material Science and Manufacturing Technology, Faculty of Engineering, Czech University of Life Sciences Prague, Kamycka 129, 16500 Prague, Czech Republic.
This article is a numerical and experimental study of the mechanical properties of different glass, flax and hybrid composites. By utilizing hybrid composites consisting of natural fibers, the aim is to eventually reduce the percentage usage of synthetic or man-made fibers in composites and obtain similar levels of mechanical properties that are offered by composites using synthetic fibers. This in turn would lead to greener composites being utilized.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!