The flow of polymer solution and heavy oil in porous media is critical for polymer flooding in heavy oil reservoirs because it significantly determines the polymer enhanced oil recovery (EOR) and polymer flooding efficiency in heavy oil reservoirs. In this paper, physical experiments and numerical simulations were both applied to investigate the flow of partially hydrolyzed polyacrylamide (HPAM) solution and heavy oil, and their effects on polymer flooding in heavy oil reservoirs. First, physical experiments determined the rheology of the polymer solution and heavy oil and their flow in porous media. Then, a new mathematical model was proposed, and an in-house three-dimensional (3D) two-phase polymer flooding simulator was designed considering the non-Newtonian flow. The designed simulator was validated by comparing its results with those obtained from commercial software and typical polymer flooding experiments. The developed simulator was further applied to investigate the non-Newtonian flow in polymer flooding. The experimental results demonstrated that the flow behavior index of the polymer solution is 0.3655, showing a shear thinning; and heavy oil is a type of Bingham fluid that overcomes a threshold pressure gradient (TPG) to flow in porous media. Furthermore, the validation of the designed simulator was confirmed to possess high accuracy and reliability. According to its simulation results, the decreases of 1.66% and 2.49% in oil recovery are caused by the difference between 0.18 and 1 in the polymer solution flow behavior indexes of the pure polymer flooding (PPF) and typical polymer flooding (TPF), respectively. Moreover, for heavy oil, considering a TPG of 20 times greater than its original value, the oil recoveries of PPF and TPF are reduced by 0.01% and 5.77%, respectively. Furthermore, the combined effect of shear thinning and a threshold pressure gradient results in a greater decrease in oil recovery, with 1.74% and 8.35% for PPF and TPF, respectively. Thus, the non-Newtonian flow has a hugely adverse impact on the performance of polymer flooding in heavy oil reservoirs.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6290611 | PMC |
| http://dx.doi.org/10.3390/polym10111225 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Preparation of Janus Polymer Nanosheets and Corresponding Oil Displacement Properties at Ultralow Concentration.
Langmuir
March 2025
School of Chemistry and Chemical Engineering, Southwest Petroleum University, 8 Xindu Avenue, Xindu District, Chengdu, Sichuan 610500, PR China.
Conventional methods for preparing Janus nanosheets, including graphene oxide-based nanosheets, molybdenum disulfide-based nanosheets, and silicon dioxide-based nanosheets, as well as polymer-based nanosheets, involve complicated procedures, poor repeatability, and difficulty in imparting Janus properties, which hinder further application. Here, the present authors develop a facile modified suspension polymerization method for preparing Janus polymer nanosheets, in which deep eutectic solvents completely replace water as the continuous phase. Janus polymer nanosheets can be fabricated using common hydrophobic and hydrophilic monomers, such as styrene (St), butyl acrylate (BA), acrylamide (AM), 2-acrylamido-2-methylpropanesulfonic acid (AMPS), acryloyloxyethyl trimethylammonium chloride (DAC), and maleic anhydride (MAH).
View Article and Find Full Text PDFEnhanced oil recovery via dual cross-linked polysaccharide network for superior rheology and flow efficiency.
Int J Biol Macromol
February 2025
State Key Laboratory of Enhanced Oil Recovery, China Petroleum Exploration and Development Research Institute, Beijing 100083, China.
Welan gum has been widely used in harsh reservoir development, such as good thickening ability, temperature and salt resistance. However, viscoelasticity is crucial to polymer injectability and microscopic displacement efficiency, Welan gum have rigid helical conformation and show poor rheological properties., therefore, we proposed a double network strategy to improve the molecular conformation and rheological properties of Welan gum.
View Article and Find Full Text PDFProgress in the Preparation and Applications of Microcapsules for Protective Coatings Against Corrosion.
Int J Mol Sci
February 2025
College of Materials Science and Engineering, Chongqing University, Chongqing 400044, China.
The annual economic loss caused by corrosion accounts for about 2%~4% of GDP, which exceeds the sum of losses caused by fires, floods, droughts, typhoons, and other disasters. Coating is one of the most effective methods to delay metal corrosion. With the development of technology and the intersection of disciplines, functional microcapsules have been applied to anticorrosive coatings, but microcapsules are still being updated.
View Article and Find Full Text PDFEconomic limit calculate method of blocked layer released by water flood wells.
PLoS One
February 2025
E&D Research Institute of Daqing Oilfield Company Ltd, Daqing, China.
Daqing Oilfield is in the forefront, because of polymer flooding well pattern was used to next production layer, so, first development layer was sealed after polymer well was used to next layer, and whose storage reserves is very huge. To 2021, OOIP of the first set of reserves of type II reservoirs has been sealed up to 9603 × 104 t. In order to release the reserves and reduce the influence on oil yield, water drive well pattern was used to product the sealed reserves through additional perforating, but the economic boundary standard to release the sealed layer using water drive well pattern is not determined, so, based on the principle of break-even and the seepage flow theory, this paper establishes the formula for calculating the economic limits of the various unsealing indexes by water flood well, which can effectively solve the problem of communicating and understanding the economic and engineering parameters of the released well, quantificational the limit of layer selection standard of well for releasing.
View Article and Find Full Text PDFPorosity-Limited Transport during Two-Phase Surfactant/Polymer Floods in a Layered Sandstone.
Energy Fuels
February 2025
Department of Chemical Engineering, Imperial College London, South Kensington SW7 2AZ, U.K.
Surfactant/polymer flooding presents itself as an attractive technique for the full utilization of current reservoirs given its potential to yield high oil recoveries. Despite this appeal, discrepancies between laboratory and field results exist and limit their industrial implementation. Within the scale-up process, corefloods serve as a key tool for the evaluation of the recovery potential; however, due to complexities in the fluid system itself, these are commonly performed on homogeneous core samples.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!