We investigated the effect of the morphological structure of a graphene oxide (GO) monolayer on the dewetting dynamics of the upper polymer thin films. The Langmuir-Schaefer (LS) technique was used to prepare a wrinkled GO ( wrGO) structure with a root mean square (rms) roughness of 22.7 Å. The dewetting behavior of poly(methyl methacrylate) (PMMA) thin films on the wrGO monolayers was perfectly prevented, whereas the PMMA thin films on a flat GO monolayer were dewetted at 203 °C. This wrinkle effect of the GO can be also obtained when the GOs monolayers are intercalated to the PMMA/polystyrene (PS) interface. In this multilayer, the flat GO monolayer at the interface between the PS and PMMA layers was spontaneously roughened with rms roughness of 46.9 Å after annealing and also prohibited the dewetting behavior. From the results, we found that to improve the compatibility of polymer blends by adding the two-dimensional nanosheets, it is important to control the morphological structure of the sheets at the interface, along with manipulation of the GO-polymer interactions.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/acs.langmuir.9b00141 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Background: Malaria is the disease caused by intracellular parasites known as species and is mainly transmitted by blood sucking female mosquitoes. During pregnancy, malaria results in severe complications to the mother, the fetus and the newborn. Symptoms of malaria, such as fever, malaise, headache, nausea and vomiting, in pregnant women can be mistakenly attributed solely to pregnancy.
View Article and Find Full Text PDFThe optical permittivity of monocrystalline direct bandgap semiconductors can be described well by critical point models based on parabolic band approximation (CPPB). However, the optical permittivity of polycrystalline direct bandgap semiconductors like halide perovskite thin films requires a more precise description. Till now, only thermal bandgap fluctuation or exponential decay of density of states is incorporated into the CPPB model.
View Article and Find Full Text PDFSilicon Nanotube Anode on Copper Foils for Li-Ion Batteries.
ACS Appl Mater Interfaces
January 2025
Department of Chemical Engineering and Conn Center for Renewable Energy ResearchUniversity of Louisville, 132 Eastern Parkway, Louisville, Kentucky 40292, United States.
We report a silicon anode for lithium-ion batteries consisting of a layer of 100% nanotubes directly bonded to copper foil. The process involved silicon deposition on a sacrificial zinc oxide nanorod film and removal of zinc oxide to produce a nanotube film directly on thin copper foils. The thickness of resulting films ranged from 9 to 20 μm with Si nanotubes having diameters of 200-400 nm and lengths of 2-10 μm.
View Article and Find Full Text PDFCopper Tantalate by a Sodium-Driven Flux-Mediated Synthesis for Photoelectrochemical CO Reduction.
Small Methods
January 2025
Liquid Sunlight Alliance, Lawrence Berkeley National Laboratory, 1 Cyclotron Rd, Berkeley, CA, 94720, United States.
Copper-tantalate, CuTaO (CTO), shows significant promise as an efficient photocathode for multi-carbon compounds (C) production through photoelectrochemical (PEC) CO reduction, owing to its suitable energy bands and catalytic surface. However, synthesizing CTO poses a significant challenge due to its metastable nature and thermal instability. In this study, this challenge is addressed by employing a flux-mediated synthesis technique using a sodium-based flux to create sodium-doped CTO (Na-CTO) thin films, providing enhanced nucleation and stabilization for the CTO phase.
View Article and Find Full Text PDFRemote epitaxial crystalline perovskites for ultrahigh-resolution micro-LED displays.
Nat Nanotechnol
January 2025
Key Laboratory of Bio-inspired Materials and Interfacial Science, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, China.
The miniaturization of light-emitting diodes (LEDs) is pivotal in ultrahigh-resolution displays. Metal-halide perovskites promise efficient light emission, long-range carrier transport and scalable manufacturing for bright microscale LED (micro-LED) displays. However, thin-film perovskites with inhomogeneous spatial distribution of light emission and unstable surface under lithography are incompatible with the micro-LED devices.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!